BIS Certification for Steel Countersunk Head Wire Nails IS 723

Steel countersunk head wire nails with BIS certification under IS 723 can guarantee the adherence to the standards of strength, size, and finish. This certification ensures reliable operation and relevance in industrial and commercial use. 

What is a BIS License?

The national standards body in India is the Bureau of Indian Standards (BIS), which introduces the benchmarks of quality, safety, and performance of products. BIS license ensures that a product is compliant with the Indian Standard valid at the time and is fit for purpose.

In the case of steel countersunk head wire nails, BIS licensing under the IS 723 states that the nails are to be made of approved materials, have standardised sizes, and have to pass through quality checks. BIS-licensed manufacturers are free to use the mark of ISI, which means compliance and reliability in the Indian market.

Why ISI Mark Certification is required

The most important reasons as to why ISI mark certification is needed for steel countersunk head wire nails are as follows:

1. Guarantees Structural Reliability : ISI-certified wire nails are more reliable for tolerating high fastening capacity and minimising chances of joint breakdown.
2. Assurance of Quality and Durability : Certified nails are being tested in tensile strength, bending resistance and corrosion protection.
3. Adherence to the IS 723 Standards : The certification is guaranteed to maintain a uniformity in the dimensions, finish and performance as per Indian standards.
4. Enhances Market Demand : ISI-marked nails are being favoured by builders, contractors, and bulk buyers because they guarantee quality.
5. Legal and Commercial Advantage: BIS certification assists manufacturers in meeting the regulations and getting huge supply contracts. 

Understanding IS 723 

The Indian Standard that defines specifications of steel wire nails, including countersunk head wire nails, is IS 723. The standard addresses such vital issues as material composition, dimensions, tolerances, workmanship, and finish.

It also specifies testing needs to check the mechanical strength, straightness and deformation resistance. Adherence to IS 723 measures to provide wire nails that are dependable during regular service and offer durable fastening solutions.

In general, IS 723 can be used to ensure consistency in quality, minimise failures and create safety in construction and manufacturing uses. 

Complete Documentation for BIS License Approval  

The following documents are necessary for Domestic Manufacturers:

1. List of raw material
2. Layout plan of the factory premises
3. List of testing equipment as per the Indian standard
4. Quality Control (QC) Personnel Details (Education degree and Aadhaar card)
5. GST
6. Authorized Person Aadhar & Pan Card
7. MSME
8. Electricity Bill
9. Email Address & Permanent Contact Number
10. Office Address
11. Factory Address
12. Copy of Partnership Deed / MOA (for Private Limited Co.)
13. Premises document / Rent Agreement
14. List of Manufacturing Machinery  

The following documents are necessary for Foreign Manufacturers:

1. Checklist for Application
2. Copy of Swift Remittance
3. Duly Filled Application Form
4. Copy of Business License
5. List of Machinery
6. List of Raw Material
7. Test certificate of Raw Material
8. List of Testing Equipment
9. Calibration certificate of Test Equipment
10. Process Flowchart
11. Layout Plan
12. Location Plan (Route Map)
13. Details of Technical Personnel
14. Qualification of QC
15. Copy of Certification of Product and/ System
16. Factory Test Report  
17. Agreement with AIR
18. Aadhar Card of AIR
19. AIR Nomination Form
20. Educational Degree of AIR
21. Undertakings
22. Scope of License

ISI Certification application process   

There are two key procedures to get your BIS license: Simplified and Normal.

Simplified Procedure

The steps involved in the simplified procedure are:

1. Document Collection : All the necessary KYC and technical documents are collected in order to start the BIS application without problems.
2. BIS Portal Registration : The license application is processed by the manufacturer being registered on the official portal of BIS.
3. Pre-Testing of Samples : Before submission, product samples are tested in a BIS authorized laboratory.
4. In-House Lab Requirement : Depending on the product, an internal laboratory facility might be necessary according to the BIS requirements.
5. BIS Review & Clarifications : BIS analyzes the documents and test reports provided and can seek clarifications.
6. BIS Audit at Factory : Audit of the product samples carried out by the BIS inspectors is done at the factory. 
7. Timely Audit Completion : The audit, inspection and sample collection are conducted within 17 days of the application submission along with the EVTL India engineer.
8. EVTL India Engineer- Factory Inspection : The BIS auditor and an engineer at EVTL India undertake a proper inspection at the factory.
9. Independent Collection of Samples : The BIS auditor draws samples to be tested by the post-audit.
10. Sample Testing at BIS Lab : BIS sealed samples are sent to BIS laboratories, and the BIS department pays the price of testing.
11. Grant of BIS License : Upon satisfactory document inspection, testing and audit, ISI license is issued. 

Normal Procedure

The steps involved in the normal procedure are:

1. Submit Documents : Firstly, it is required to submit all the KYC and technical documentation to start the BIS application.
2.  Plan In-House Laboratory and Technical Proposal : Prepare an internal lab in case necessary and prepare all technical documentation.
3. Ready Factory Test Report (FTR) : Carry out in-house tests and document the FTR to demonstrate that the product is to the standards.
4. Submit Application & Fees : Includes your BIS application and the amount of fees necessary by the government.
5. BIS Audit : An audit of documents and processes at a BIS takes place within 3 weeks.
6. EVTL India Engineer Factory Inspection : BIS auditor inspects the factory with an EVTL India engineer to make sure that everything is in order. 
7. Sample Collection & Sealing : The BIS auditor picks samples randomly, puts them into a sealed sample and forward the sample to a BIS authorized lab to be tested.
8. License Approval : After the lab tests of the sample are passed-on, BIS issues the ISI license, and your product is certified and market-ready. 

Official BIS Certification Timeline 

According to IS 723, the expected time duration for obtaining BIS Certification for Steel Countersunk Head Wire Nails is as follows:

• For Indian Manufacturers : 40-45 days
• For International Manufacturers : Approximately 180 days  

Why choose EVTL India for BIS Approval?

EVTL India is a BIS-certified consultant of the steel countersunk head wire nail as per IS 723. We simplify the whole certification process including documentation, organising BIS-approved testing and facilitating audits.

Your products are BIS compliant, safe, and ready to market without wasting time because our team of experts makes sure that your products satisfy the BIS requirements. 

Conclusion

BIS Certification on Steel Countersunk Head Wire Nails under IS 723 is not only a regulatory measure but also a feature of quality, safety and reliability. The ISI mark will guarantee the buyers, contractors, and project owners that the nails meet the Indian standard and will behave in the actual real-life scenario.

Manufacturers can obtain certification without difficulties with the professional help of the experienced BIS consultants, such as EVTL India, raise their credibility in the market, and improve their brand image.

Frequently Asked Questions (FAQs)

1. What is BIS Certification for steel countersunk head wire nails IS 723?

It ensures that the wire nails meet the standards of the quality and safety of the Indians. 

2. What is the contribution of a BIS Consultant steel countersunk head wire nails during the certification process?

A BIS consultant will be used to direct the manufacturers by documentation, testing coordination, factory audit and overall compliance to facilitate easy and timely BIS certification.

3. What is a BIS agent for steel countersunk head wire nails and when is he needed?

Foreign manufacturers are required to have an AIS agent, also referred to as an Authorized Indian representative (AIR) to facilitate the activities of BIS authorities and certification processes in India. 

4. What is the ISI Mark of wire nails?

It demonstrates that the nails are tried, certified and of IS 723.

5. What are the benefits of BIS Certification for buyers and construction projects?

It guarantees stable quality, delays in service, and safe construction.