BIS Certification for Branch Pipe for Fire-Fighting IS 2871:2012

This is where BIS Certification on Branch Pipes to Fire-Fighting in IS 2871:2012 is necessary. It guarantees that every branch pipe has been tested on performance and quality, therefore, it will perform well at the time it is needed the most and also be safe.

What is the BIS License?

The government body that inspects the safety and quality of products is the BIS (Bureau of Indian Standards). The product is BIS certified as fire-fighting branch pipes; this implies that the product complies with the requirements of the IS 2871: 2012 which are strength, design and performance.

Once a manufacturer is awarded this license, the manufacturer is allowed to use the ISI mark on the branch pipe. This label indicates that the product is tested and is safe. It assures the fire services and buyers that the branch pipe would be effective and working efficiently during emergencies. 

Why is ISI Mark Certification Important?

Here are the reasons mentioned why is ISI Mark Certification important for Branch Pipe for Fire-Fighting:

1. Safety First:  It helps to avoid hazardous collisions such as electricity shocks or fire due to improper wiring.
2. Dependable Performance:  All the machines are tested to make sure stitching is smooth and thread tension is consistent.
3. Official Compliance : It demonstrates that the product complies with the strict rules of quality designed by IS 1610:2018.
4. Customer Trust :  When a customer sees ISI mark, they are sure that they are purchasing a quality product.
5. Better Business : This is much easier to sell to large retailers or to export to foreign countries. 

Understanding IS 2871:2012

The official Indian Standard of Branch Pipes to be used in fire fighting is IS 2871:2012. It determines the regulations in the making, design, and testing of these pipes to make sure that they perform perfectly in an emergency.

The normal test that the pipes are able to serve a very high pressure of water, resist rusts and remain dependable even under extreme conditions are conducted. Branch pipes supplied in compliance with IS 2871: 2012 are subjected to test to make certain that it is capable of delivering a constant supply of water into a spray and a powerful jet without a leak. 

Documents you need for BIS Registration

The following documents are necessary for Domestic Manufacturers:

1. List of raw material
2. Layout plan of the factory premises
3. List of testing equipment as per the Indian standard
4. Quality Control (QC) Personnel Details (Education degree and Aadhaar card)
5. GST
6. Authorized Person Aadhar & Pan Card
7. MSME
8. Electricity Bill
9. Email Address & Permanent Contact Number
10. Office Address
11. Factory Address
12. Copy of Partnership Deed / MOA (for Private Limited Co.)
13. Premises document / Rent Agreement
14. List of Manufacturing Machinery  

The following documents are necessary for Foreign Manufacturers:

1. Checklist for Application
2. Copy of Swift Remittance
3. Duly Filled Application Form
4. Copy of Business License
5. List of Machinery
6. List of Raw Material
7. Test certificate of Raw Material
8. List of Testing Equipment
9. Calibration certificate of Test Equipment
10. Process Flowchart
11. Layout Plan
12. Location Plan (Route Map)
13. Details of Technical Personnel
14. Qualification of QC
15. Copy of Certification of Product and/ System
16. Factory Test Report  
17. Agreement with AIR
18. Aadhar Card of AIR
19. AIR Nomination Form
20. Educational Degree of AIR
21. Undertakings
22. Scope of License

How to get BIS License: Step-by-step? 

There are two key procedures to get your BIS license: Simplified and Normal.

Simplified Procedure

The steps involved in the simplified procedure are:

1. Document Collection : Every required KYC and technical paperwork is gathered to begin the BIS application without issues.
2. BIS Portal Registration : The license application is processed by the manufacturer being registered on the official portal of BIS.
3. Pre-Testing of Samples : Before submission, product samples are tested in a BIS authorized laboratory.
4. In-House Lab Requirement : Depending on the product, an internal laboratory facility might be necessary according to the BIS requirements.
5. BIS Review & Clarifications : BIS analyzes the documents and test reports provided and can seek clarifications.
6. BIS Audit at Factory : Audit of the product samples carried out by the BIS inspectors is done at the factory. 
7. Timely Audit Completion : Within 17 days after the application submission, the audit, inspection, and sample collection are done together with the EVTL India engineer.
8. Factory Inspection with EVTL India Engineer : The BIS auditor and an engineer at EVTL India undertake a proper inspection at the factory.
9. Independent Collection of Samples : The BIS auditor draws samples to be tested by the post-audit.
10. Sample Testing at BIS Lab : Samples BIS-sealed are submitted to BIS laboratories and the cost of testing is paid by the BIS department.
11. Grant of BIS License : Upon satisfactory document inspection, testing and audit, ISI license is issued. 

Normal Procedure

The steps involved in the normal procedure are:

1. Submit Documents : Firstly, it is required to submit all the KYC and technical documentation to start the BIS application.
2.  Plan In-House Laboratory and Technical Proposal : Prepare an internal lab in case necessary and prepare all technical documentation.
3. Ready Factory Test Report (FTR) : Carry out in-house tests and document the FTR to demonstrate that the product is to the standards.
4. Submit Application & Fees : Includes your BIS application and the amount of fees necessary by the government.
5. BIS Audit : An audit of documents and processes at a BIS takes place within 3 weeks.
6. EVTL India Engineer Factory Inspection : BIS auditor inspects the factory with an EVTL India engineer to make sure that everything is in order. 
7. Sample Collection & Sealing : The BIS auditor picks samples randomly, puts them into a sealed sample and forward the sample to a BIS authorized lab to be tested.
8. License Approval : After the lab tests of the sample are passed-on, BIS issues the ISI license, and your product is certified and market-ready. 

How long does it take for a BIS Approval?

According to IS 2871:2012, the expected time duration for earning BIS Certification for Branch Pipe for Fire-Fighting is as follows:

• For Indian Manufacturers (40-45 days is the standard timeframe)
• For International Manufacturers (180 days is the standard timeframe) 

How EVTL India makes BIS process easy?

EVTL India is a reliable party that simplifies compliance with the legal specifications and quality standards. We offer full support, such as factory audits, product testing, and advice of experts, to enable the companies to pass the BIS regulations.

EVTL India assists the manufacturers of the Branch Pipe used in Fire-fighting to go through the certification process by BIS. To ensure that your product receives BIS certification, and is fully ready to enter the Indian market, our professionals oversee the documentation, testing organization, and their clearance. 

Conclusion

The BIS license of Branch Pipe of Fire-Fighting is not only to comply with the law but to demonstrate to your customers that your products are good and safe. Through the assistance of the professionals, manufacturers are able to complete the entire certification process in a much shorter and simpler manner.

The ISI mark assures the buyers that your product has been subjected to rigorous testing and that it is of high quality as stipulated by India. In the case of EVTL India, we deal with the complex aspects of the process. 

Frequently Asked Questions (FAQs)

1. Do you require an ISI mark on the firefighting branch pipes?

Yes, the manufactures are required to possess BIS certification to guarantee that these life saving tools are compliant with the official Indian standard of safety.

2. What is the time taken by an Indian manufacturer to obtain this license?

The domestic manufacturers would normally carry out the whole certification exercise in 40 to 45 days.

3. What are the primary quality tests which are conducted under IS 2871:2012?

The pipes are mainly tested on hydraulic pressure, resistance to leakage and the capability of changing between a jet and spray.

4. Is an in house laboratory required to submit an application to the BIS License?

No, your factory should not lack the simple testing equipment that is necessary by BIS to be able to test the quality of every batch that is produced.

5. How What does the ISI mark mean to fire fighting equipment?

The mark also ensures that the branch pipe will never break or collapse under high pressure of water in case of a fire outbreak.