BIS Certification for Malathion Dusting Powders 2568:1978

Malathion dusting powders find widespread use in agriculture as an insecticide in crops and grains. Such formulations can be used directly without mixing with any substance, since their use is convenient due to the ease of applying them evenly on the required area. The performance of these products relies on uniform particle distribution, correct chemical strength, and stable formulation behaviour.

To ensure that the product performs effectively, BIS certification ensures that the dusting powder undergoes tests according to the set criteria. Characteristics such as the active ingredients, fineness, dustability, and effectiveness in general are outlined in IS 2568: 1978. For producing, marketing, and selling Malathion dusting powders in India, it becomes necessary to get the BIS certification as per the standard.

What is IS 2568: 1978?

This is the Indian Standard for Malathion Dusting Powders used in agricultural pest control applications. It mentions the formulation quality to ensure safe and effective use against insect pests. As per the BIS (Bureau of Indian Standards), pesticides are:

Evaluated for active ingredient content
Tested for particle fineness
Assessed for dusting properties
Checked for chemical stability

Who can apply for Malathion Pesticide BIS License?

BIS authorisation under IS 2568: 1978 is required for businesses involved in manufacturing, importing, or supplying Malathion DP formulation in India.

Applicable to:

Manufacturers (India) - Must get BIS approval if the Malathion insecticide is covered under QCO.
Foreign Manufacturers - Need certification to export the products to India.
Importers/Brand Owners - Must ensure that the products are BIS-certified before sale.
Sellers/Distributors - Should only sell certified agricultural chemicals.

Testing and Inspection Requirements

To ensure consistent quality of Malathion Dusting Powders used for agricultural pest control, the Bureau of Indian Standards outlines the minimum requirements under IS 2568: 1978. This certification ensures that manufacturers' formulations have proper chemical strength, uniform particle distribution, and effective insecticidal performance for safe and efficient field application. The BIS testing parameters and quality checks for the Dusting Powders are listed below:

Test Group	What is Tested	Purpose
Malathion Content Test	Percentage of malathion by mass and deviation from declared value	Ensures correct chemical strength and effectiveness of insecticidal action
High Temperature Stability Test	Stability of malathion after exposure to 90°C for specified duration	Ensures product does not degrade under storage or extreme conditions
Particle Size / Sieving Test	Material passing through 75-micron IS sieve	Ensures uniform fineness for effective dust dispersion and application
Bulk Density After Compaction Test	Change in bulk density after compaction process	Ensures consistency in packing behavior and application performance
Acidity / Alkalinity Test	Acidity (as H₂SO₄) or alkalinity (as NaOH) depending on formulation limits	Ensures chemical stability and prevents degradation or irritation risks
Flowability & Clogging Observation	Free flow from hand rotary duster without clogging or bridging	Ensures smooth field application without operational blockage
Packaging & Marking Inspection	Labelling, batch details, BIS mark, cautionary statements	Ensures regulatory compliance and traceability of product
Material Impurity Check	Presence of extraneous impurities or unwanted additives	Ensures purity and safety of formulation

Steps for Malathion DP Formulation BIS License

The BIS Authorisation process ensures that the dusting powder insecticide meets the required standards for proper and efficient operation. This process is set by the Bureau of Indian Standards (BIS) and includes the following steps:

Online Registration: Manufacturers register on the BIS Manak portal by submitting company, factory, and product details. Foreign manufacturers must appoint an Authorized Indian Representative (AIR).
Testing at BIS-Approved Laboratory: Product samples are tested in BIS-approved laboratories for chemical composition, silica content, moisture content, fineness, compressive strength, and other physical performance parameters.
Application Submission: The application is submitted along with test reports, technical documents, and factory details. Foreign manufacturers must also submit AIR-related documents.
Factory Inspection: The Bureau of Indian Standards officials inspect the manufacturing units to verify the production process, safety measures, and quality control system.
Grant of BIS License: Upon successful verification of all requirements, BIS grants the certification license under Scheme-I.
Use of ISI Mark: Once approved, the manufacturer can use the ISI mark on the product with a CM/L number, confirming that the product meets BIS standards.

Key Documents for IS 2568: 1978 approval

Document Category	Documents Required
Basic Details	GST Certificate, Email ID & Contact Number, Factory & Office Address, Rent Agreement / Lease Deed (if applicable),Partnership Deed (if applicable for partnership firms)
Manufacturing Details	List of Machinery, Process Flow Chart, Factory Layout Plan
Raw Material Details	List of Raw Materials, Supplier Details, Raw Material Invoices, Raw Material Test Certificates
Testing & Quality Control	List of Testing Equipment, Calibration Certificates, QC/Lab In-charge Appointment Letter & Qualification
Production Details	Annual Installed Capacity, Last Year Production Value
Product & Packaging Details	Quantity per Package, Nature of Packing, Product Printing / Marking Details
Management Details	Top Management Details, BIS Communication Contact Person
Brand & Certification Documents	Trademark / Brand Certificate, Consent Letter from BIS Recognized Laboratory
Additional Documents	Weekly Off Details, Hygiene Document (if applicable), Relaxation Letter (if applicable), Any Other Relevant Document
Foreign Manufacturer Requirement	Appointment of Authorized Indian Representative (AIR) for BIS coordination and compliance in India

The Foreign manufacturers are required to appoint an Authorized Indian Representative (AIR) in India. The representative is the local point of contact for the Bureau of Indian Standards (BIS) and takes care of all rules and compliance work in India.

Marking Requirements & License Validity

Marking Requirements

After the manufacturer obtains a BIS license, the ISI Mark for Insecticide Dusting Powders must be written clearly and permanently either on its packaging or on the product. The marking should also include key information, such as the manufacturer’s identification and licence number (CM/L). This ensures the product complies with all safety and quality standards. Additional details are provided below:

Requirement	Details
ISI Mark	Indicates that the product is BIS certified and conforms to standards
Standard Number	IS 2568: 1978
CML Number	Certification Marks License (CML) number issued by BIS
Manufacturer Details	Name of manufacturer or registered trademark
Batch / Date	Batch number, heat number, or manufacturing date for traceability

Note: Marking is typically applied using durable stamping, tagging, or permanent printing to ensure clear identification during handling, storage, and transportation, as per BIS marking requirements.

how long is BIS License valid for malathinon dust power ?

particulars	Details
Initial Validity	Typically 1 to 2 years, depending on BIS approval conditions
Renewal	Must be renewed before expiry by submitting the application along with the prescribed fee and updated documents
Surveillane	BIS may inspect factories and test samples periodically
Annual Fees	Annual license fee must be paid regularly
Compliance	Continuous compliance with BIS requirements is necessary
License Format	BIS is shifting towards a 10-digit license number format
Non-Compliance Risk	May lead to suspension or cancellation of license

charges for malathion insecticide BIS Approval

The cost of BIS Approval for micro silica includes charges for application, inspection, license, testing, and marking. These fees are paid to BIS as per Scheme I guidelines.

Charge Type	Indian Manufacturers	Foreign Manufacturers
Application Fee	INR 1,000	USD 15
Audit Charges	INR 7,000	USD 3,200 – 5,900
License Fee	INR 1,000	USD 15
Marking Fee	As applicable	As applicable
Testing Charges	As applicable	As applicable
EVTL India Consultancy Fee	As per actual	As per actual

Note:

Application fee for foreign manufacturers is payable via SWIFT (SAARC countries may pay in INR with applicable GST).
Audit charges for foreign manufacturers vary based on country/location.
The marking fee is determined based on the product category and production volume (MSME benefits may apply).
Testing charges are to be paid directly to BIS-recognised laboratories.
Consultancy fees can vary depending on product type and factory location.

Conclusion

Malathion dusting powder continues to play a key role in pest control. The adherence to IS 2568: 1978 will assist in ensuring that the product will not only have the right formulation but also proper consistency and functionality. It will minimize risk of either underdosing or ineffective application. It also ensures uniform field performance across different environmental and crop conditions.

The process of obtaining approval from BIS involves many steps, such as proper planning and testing of the product in question before preparing all necessary documents. The company EVTL India provides services related to helping companies comply with all regulations and prepare test reports necessary to apply for certification with BIS.