An electric iron is a common household appliance used to remove wrinkles from clothes using heat and pressure. The main principle on which it works is the conversion of electrical energy into heat by use of an internal heating element, and it uses that heat energy in smooth and neat ironing of fabrics. Since it operates at high temperatures and uses electricity, safety and performance are very important to prevent risks like electric shock, overheating, or fire. To ensure efficiency and quality, electric irons in India must comply with the standard IS 302 (Part 2/Section 3): 2024, issued by the Bureau of Indian Standards.
This standard specifies the performance requirements for electric irons, covering aspects such as insulation, temperature control, durability, and protection against electrical hazards. Manufacturers must get their electric irons tested and approved to obtain the BIS license and use the ISI mark, which assures consumers about the safe and reliable performance of the product.
what is is 302(part 2/ sec 3)?
This is the Indian Standard for electric irons. It is set by the Bureau of Indian Standards to ensure that electric irons used for ironing clothes are safe, reliable, and are of good quality and result in efficient and proper performance.
This standard ensures that electric irons must be:
- Safe to use without risk of electric shock or fire
- Able to handle high temperatures safely during operation
- Properly insulated to protect users from electrical hazards
- Equipped with effective temperature control for safe performance
- Strong and durable for regular household use
- Designed to prevent overheating and ensure consistent performance
testing and inspection requirements
To guarantee the proper functioning and efficient performance of electric irons, the Bureau of Indian Standards defines specific testing and inspection requirements under the standard. These tests are carried out during manufacturing to make sure that electric irons are safe for regular use and meet all standard requirements and orders.
what is r & s ?
- R (Required): Test must be done in the manufacturer’s own laboratory.
- S (Subcontracting Allowed): Test can be conducted in a BIS-approved or
NABL-accredited external laboratory.
electrical safety and performance tests
- Earth Continuity Test (R) – Ensures proper earthing to prevent electric shock
- Electric Strength Test (R) – Checks insulation strength under high voltage
- Leakage Current Test (R) – Ensures no unsafe current leakage during operation
- Power Input and Current Test (R) – Verifies correct power consumption and efficiency
- Functional Test (R) – Confirms proper working of the electric iron
safety protection tests
- Protection Against Electric Shock (R) – Ensures no contact with live parts
- Provision for Earthing (R) – Confirms safe grounding of the appliance
- Abnormal Operation Test (S) – Checks safety under fault or misuse conditions
- Overload Protection Test (S) – Ensures protection during excessive load
heating and temperature tests
- Heating Test (R) – Ensures proper heat generation and temperature control
- Temperature Rise Test (R) – Checks safe temperature limits during use
mechanical and construction tests
- Mechanical Strength Test (S) – Ensures durability against physical stress
- Stability Test (S) – Checks that the iron remains stable during use
- Construction Test (S) – Verifies proper design and assembly
- Internal Wiring Test (S) – Ensures safe and secure internal connections
material and durability tests
- Moisture Resistance Test (S) – Protects against humidity and water exposure
- Resistance to Rusting (S) – Checks protection against corrosion
- Creepage Distance and Clearance Test (S) – Ensures safe spacing between electrical parts
bis certification process for electric iron
The BIS certification process ensures that electric irons meet the required performance and regulatory standards defined by the Bureau of Indian Standards. The process is simple and includes the following steps:
- Online Registration:Manufacturers register on the BIS Manak Portal by submitting basic details like
company information, factory location, and product specifications. Foreign
manufacturers must appoint an Authorized Indian Representative (AIR).
- Product Testing:Electric iron samples are tested in BIS-approved laboratories to check safety, insulation,
heating performance, and overall quality as per the standard.
- Application Submission: The manufacturer submits the application along with test reports, documents, and
manufacturing details.
- Factory Inspection: BIS officials inspect the factory to verify production process, quality control, and safety
measures.
- Grant of BIS License: If all requirements are fulfilled, BIS grants the certification license under Scheme-I.
- Use of ISI Mark: After approval, the manufacturer can use the ISI mark with a CM/L number on the
product, showing it meets BIS standards.
documents required for is 302 (part 2/ sec 3) certification
| Basic Details | - GST certificate
- Email ID & Contact Number
- Factory & Office address
- Rent Agreement / Lease Deed (if applicable)
|
| Legal Documents | - Partnership Deed (if partnership firm)
|
| Manufacturing Details | - List of Machinery
- Process Flow Chart
- Layout Plan of Factory
|
| Raw Material Details | - List of Raw Materials
- Supplier Details
- Raw Material Invoices
- Raw Material Test Certificates
|
| Testing & Quality Control | - List of Testing Equipment
- Calibration Certificates
- QC / Lab In-charge Appointment Letter & Qualification
|
| Production Details | - Annual Installed Capacity
- Last Year Production Value
|
| Product & Packaging Details | - Quantity per Package
- Nature of Packing
- Nature of Printing / Marking on Product
|
| Management Details | - Top Management Details
- Concerned Person for BIS Communication
|
| Brand & Certification Documents | - Trademark / Brand Certificate
- Consent Letter from BIS Recognized Laboratory
|
| Additional Documents | - Weekly Off Details
- Hygiene Document (if applicable)
- Relaxation Letter (if applicable)
- Any Other Relevant Document
|
Foreign manufacturers must additionally appoint an Authorized Indian Representative (AIR) to coordinate with the Bureau of Indian Standards (BIS) and manage compliance requirements in India.
marking requirements & license validity
marking requirements
When a manufacturer obtains the BIS License, the ISI Mark for electric iron, must be applied clearly and permanently on the product or its packaging. In addition to the ISI Mark, other important details must also be provided on the product or packaging, as specified in the table below ,this ensures product meets to all quality and safety standard.
Note:
Marking is typically applied using durable stamping, tagging, or permanent printing to ensure clear identification during handling, storage, and transportation, as per BIS marking requirements.
validity of bis license for electric iron
After obtaining BIS Certification for the product, the license is valid for a fixed period and must be maintained by following BIS rules and standards.
cost of bis certification for electric iron
The cost of BIS certification includes charges for application, inspection, license, testing, and marking. These fees are paid to BIS as per Scheme I guidelines.
cost breakdown
Indian Manufacturers
| S. No. | Major Charges | Particulars | Amount (INR) | Remarks |
| 1 | BIS Fees | Application Fee | INR 1,000 | - |
|
| Audit Charges | INR 7,000 | - |
|
| License Fee | INR 1,000 | - |
| | Marking Fee | Depends on product | Discount as per MSME |
| 2 | Testing Charges | Sample Testing Fee | As applicable | Payable to a BIS-approved laboratory |
| 3 | EVTL India Service Fee | Consultancy & Support | As per actual | Depends on product type and factory location. |
Foreign Manufacturers
| S. No. | Major Charges | Particulars | Amount | Remarks |
| 1 | BIS Fees | Application Fee | USD 15 | Payable via SWIFT to BIS. SAARC countries can pay INR with 18% GST. |
|
| Audit Charges | USD 3,200 – 5,900 | Depend on Country |
|
| License Fee | USD 15 | - |
| | Marking Fee | Depends on product | - |
| 2 | Testing Charges | Sample Testing Fee | As applicable | Payable to a BIS-approved laboratory |
| 3 | EVTL India Service Fee | Consultancy & Support | As per actual | Based on product and manufacturing location.
|
Note: Additional costs such as pre-testing or factory pre-inspection may apply. The total cost may vary depending on product type, testing requirements, and current BIS guidelines.
conclusion
BIS certification for electric irons as per IS 302 (Part 2/Section 3):2024 ensures that the product should meet important safety, quality, and performance requirements for everyday use. Since electric irons operate at high temperatures and use electricity, this certification makes sure they are safe from risks like electric shock, overheating, and fire hazards. It also ensures that each product is properly tested for insulation, heating efficiency, durability, and overall performance. This certification helps manufacturers build trust in the market by giving a guarantee to customers that the product is reliable and meets the standards set by the Bureau of Indian Standards.
With the support of an experienced BIS consultant like EVTL India, manufacturers can complete the certification process more easily, avoid common mistakes, and get faster approval.
%20Electric%20iron.webp&w=828&q=75)