Solid Core Type Wooden Flush Door Shutters are popularly used in residential buildings,
commercial buildings and institutional buildings. These doors play a vital role in ensuring
security, privacy and performance of the building structures. It is mandatory for the
manufacturers to get certification for Wooden Flush Door Shutters (Solid Core Type) through the
Indian Standard BIS IS 2202 (Part 1): 2023 certification process. This is because the BIS QCO
for Wooden Flush Door Shutters becomes important for quality assurance.
The BIS standard under IS 2202 (Part 1): 2023 outlines the requirements relating to material, construction, dimensions, workmanship and performance of solid core wooden flush door shutters. This helps ensure durability and dimensional stability along with consistent performance of the doors. Getting a BIS ISI mark for Wooden Flush Door Shutters would be beneficial for the products since it adds value and improves credibility among architects, contractors and others concerned with such products.
What is IS 2202 (Part 1):2023 for Wooden Flush Door Shutters?
This is the Indian Standard for wooden flush door shutters with plywood face panels, used in residential and commercial buildings. It outlines a few requirements to ensure the plywood panels meet the quality and performance standards. As per the BIS (Bureau of Indian Standards), shutters are -
- Tested for load-bearing performance
- Checked for material quality
- Verified for moisture resistance
- Evaluated for overall safety
- Assessed for surface finish
What Products Are Covered Under IS 2202 (Part 1): 2023?
The standard IS 2202 (Part 1): 2023 is applicable to flush door shutters made from wooden shutters of solid core type, with plywood faces that are employed in residential, commercial, institutional, and industrial structures. The standard provides guidelines on the construction, material, workmanship, and performance of flush door shutters. The products that are covered by this standard are as follows -
- Solid core wooden flush door shutters
- Plywood-faced flush door shutters
- Decorative flush door shutters
- Non-decorative flush door shutters
- Interior and exterior flush doors
- Flush doors for residential buildings
- Flush doors for offices, schools, hospitals, and commercial premises
- Laminated flush door shutters
Key Requirements of IS 2202 (Part 1): 2023
For getting the BIS Certification of Wooden Flush Door Shutters, certain requirements need to be fulfilled by the manufacturers in accordance with IS 2202 (Part 1): 2023.
Main requirements are -
- Use of approved face panels and appropriate core materials
- Adherence to dimensions and thickness specifications
- Good workmanship and consistent construction
- Bonding strength between face panels and core material
- Impact resistance, flexure, edge loading, and buckling resistance
- Performance at different levels of humidity
- Conformity to end immersion and moisture resistance specification
- Good surface finish
BIS Testing Requirements for Wooden Flush Door Shutters
To ensure safe performance of wooden flush door shutters, the Bureau of Indian Standards outlines the minimum requirements under IS 2202 (Part 1): 2023. This certification ensures that manufacturers meet the quality and durability parameters as per the standard. The BIS testing parameters and quality checks for the door shutters are listed below:
BIS Certification Process for Wooden Flush Doors under IS 2202 (Part 1):2023
The BIS registration process for Wooden Flush Door Shutters ensures that the door shutter
meets the required standards for proper and efficient operation. This process is set by the
Bureau of Indian Standards (BIS) and includes the following steps:
- Online Registration: Manufacturers register on the BIS Manak portal by submitting company, factory, and product details. Foreign manufacturers must appoint an Authorized Indian Representative (AIR).
- Testing at BIS-Approved Laboratory: Product samples are tested in BIS-approved laboratories for structural integrity and dimensional accuracy.
- Application Submission: The application is submitted along with test reports, technical documents, and factory details. Foreign manufacturers must also submit AIR-related documents.
- Factory Inspection: BIS officials conduct on-site inspections for manufacturing units to verify the production process, safety measures, and quality control systems.
- Grant of BIS License: Once all requirements are successfully fulfilled, BIS grants the certification license under Scheme-I.
- Use of ISI Mark: After approval, the manufacturer can affix the ISI mark on the product with a CM/L number, confirming that the product meets BIS standards.
Required Documents for BIS Approval of Wooden Flush Door
Shutters
| Document Category | Documents Required |
|---|
| Basic Details | GST Certificate, Email ID & Contact Number, Factory & Office Address, Rent Agreement / Lease Deed (if applicable),Partnership Deed (if applicable for partnership firms) |
| Manufacturing Details | List of Machinery, Process Flow Chart, Factory Layout Plan |
| Raw Material Details | List of Raw Materials, Supplier Details, Raw Material Invoices, Raw Material Test Certificates |
| Testing & Quality Control | List of Testing Equipment, Calibration Certificates, QC/Lab In-charge Appointment Letter & Qualification |
| Production Details | Annual Installed Capacity, Last Year Production Value |
| Product & Packaging Details | Quantity per Package, Nature of Packing, Product Printing / Marking Details |
| Management Details | Top Management Details, BIS Communication Contact Person |
| Brand & Certification Documents | Trademark / Brand Certificate, Consent Letter from BIS Recognized Laboratory |
| Additional Documents | Weekly Off Details, Hygiene Document (if applicable), Relaxation Letter (if applicable), Any Other Relevant Document |
| Foreign Manufacturer Requirement | Appointment of Authorized Indian Representative (AIR) for BIS coordination and compliance in India |
Foreign manufacturers must appoint an Authorized Indian Representative (AIR) in India. The representative is the local point of contact for the Bureau of Indian Standards (BIS) and takes care of all rules and compliance work in India.
ISI Marking Requirements for Wooden Flush Door Shutters
After obtaining a BIS license, the ISI Mark for the wooden flush door shutter must be clearly and
permanently marked on its packaging or on the product. Along with the ISI Mark, key
information such as the manufacturer’s identification and licence number (CM/L) is required.
This ensures the product complies with all safety and performance standards. More details are
mentioned below:
| Requirement | Details |
|---|
| ISI Mark | Indicates that the product is BIS certified and conforms to standards |
| Standard Number | IS 2202 (Part 1): 2023 |
| CML Number | Certification Marks License (CML) number issued by BIS |
| Manufacturer Details | Name of manufacturer or registered trademark |
| Batch / Date | Batch number, heat number, or manufacturing date for traceability |
Note: Marking is typically applied using durable stamping, tagging, or permanent printing to ensure clear identification during handling, storage, and transportation, as per BIS marking requirements.
Validity Period of ISI Mark License for Solid Core Type
Wooden Flush Door Shutters
| particulars | Details |
|---|
| Initial Validity | Typically 1 to 2 years, depending on BIS approval conditions |
| Renewal | Must be renewed before expiry by submitting the application along with the prescribed fee and updated documents |
| Surveillane | Includes periodic factory inspections and market sample testing conducted by BIS |
| Compliance | Continuous following to standard and applicable Quality Control Orders (QCOs) is mandatory |
| Risk | Non-compliance or failed sample testing may lead to suspension or cancellation of the BIS license |
BIS Certification Fees for Wooden Flush Door Shutters
The cost of a BIS License for wooden flush door shutters includes charges for application,
inspection, license, testing, and marking. These fees are paid to BIS as per Scheme I
guidelines.
| Charge Type | Indian Manufacturers | Foreign Manufacturers |
|---|
| Application Fee | INR 1,000 | USD 15 |
| Audit Charges | INR 7,000 | USD 3,200 – 5,900 |
| License Fee | INR 1,000 | USD 15 |
| Marking Fee | As applicable | As applicable |
| Testing Charges | As applicable | As applicable |
| EVTL India Consultancy Fee | As per actual | As per actual |
Note:
- Application fee for foreign manufacturers is payable via SWIFT (SAARC countries may pay in INR with applicable GST).
- Audit charges for foreign manufacturers vary based on country/location.
- The marking fee is determined based on the product category and production volume (MSME benefits may apply).
- Testing charges are to be paid directly to BIS-recognised laboratories.
- Consultancy fees vary based on product type and factory location.
Conclusion
The quality of wooden flush door shutters is significant in determining whether there is safety
and effectiveness in residential, commercial and institutional buildings. IS 2202 (Part 1):2023
guides manufacturers in ensuring that their products meet all the necessary standards, such as
material, manufacturing process, dimensions, and performance. Obtaining the BIS ISI Mark for
Flush Door Shutters ensures that the products comply with Indian Standards. Thus, it helps
build confidence among builders, architects, contractors and distributors.
Getting BIS Certification for Wooden Flush Door Shutters (Solid Core Type) is beneficial for
manufacturers from both the market perspective and quality point of view. In case you require
any help with documentation, testing, preparation for factory inspection, or getting certification,
you may contact a professional BIS consultant for Flush Door Shutters. Being a professional
BIS agent for Wooden Flush Door Shutters, EVTL India is able to assist you with BIS
certification processes smoothly.
