BIS Certification for Sulphuric Acid IS 266

BIS Certification for Sulphuric Acid as per IS 266 will guarantee that the acid meets the requirements of Indian standards regarding purity, concentration and the chemical composition. This certification ensures that the product is safe, reliable, and fit to be used in industries. BIS acceptance also enhances regulatory conformity and acceptance in India.

An Introduction to BIS Certification

The ISI Mark Certification is given by the Bureau of Indian Standards (BIS), a national standards authority in India. It shows that a product is in conformity to the applicable Indian Standard and fulfills overall safety standards.

In the case of, ISI certification for Sulphuric Acid according to the IS 266 standard is used to guarantee compliance to the specified level of purity and strength as well as testing standards. BIS license enables manufacturers to display the ISI Mark on their product. This certification is a symbol of quality, reliability and regulatory conformity in the Indian market. 

Why is the ISI Mark important for manufacturers?

The fundamental reasons that show why ISI Mark Important for Manufacturers are as follows:

1. Ensures Chemical Safety : Assures that there is safety in handling and usage when meeting the BIS safety parameters.
2. Maintains Quality & Purity : Ensures consistency of concentration and controlled impurities.
3. Regulatory Compliance : Checks that all requirements of IS 266 are followed.
4. Market acceptance : Enhances the trust and preference of industrial buyers.
5. Commercial Advantage : Assists in gaining legal acceptance, tenders and business contracts. 

What does IS 266 cover?

The Indian Standard IS 266 addresses the need of industrial Sulphuric Acid, such as chemical composition, allowed impurities, physical characteristics, testing procedures, and packaging procedures. BIS certification under this standard is to make sure the product is produced and undergone testing using these norms.

It also confirms Sulphuric Acid supplied as being safe, reliable and consistent in quality. Manufacturers with a license have permission to use the ISI mark which signifies conformity and reliability. In general, IS 266 sets the standards of quality and safety in the Indian industry market. 

Key Documents for securing BIS License  

The following documents are necessary for Domestic Manufacturers:

1. List of raw material
2. Layout plan of the factory premises
3. List of testing equipment as per the Indian standard
4. Quality Control (QC) Personnel Details (Education degree and Aadhaar card)
5. GST
6. Authorized Person Aadhar & Pan Card
7. MSME
8. Electricity Bill
9. Email Address & Permanent Contact Number
10. Office Address
11. Factory Address
12. Copy of Partnership Deed / MOA (for Private Limited Co.)
13. Premises document / Rent Agreement
14. List of Manufacturing Machinery  

The following documents are necessary for Foreign Manufacturers:

1. Checklist for Application
2. Copy of Swift Remittance
3. Duly Filled Application Form
4. Copy of Business License
5. List of Machinery
6. List of Raw Material
7. Test certificate of Raw Material
8. List of Testing Equipment
9. Calibration certificate of Test Equipment
10. Process Flowchart
11. Layout Plan
12. Location Plan (Route Map)
13. Details of Technical Personnel
14. Qualification of QC
15. Copy of Certification of Product and/ System
16. Factory Test Report  
17. Agreement with AIR
18. Aadhar Card of AIR
19. AIR Nomination Form
20. Educational Degree of AIR
21. Undertakings
22. Scope of License

How to obtain ISI Mark Certification

There are two key procedures to get your BIS license: Simplified and Normal.

Simplified Procedure

The steps involved in the simplified procedure are:

1. Document Collection : All the necessary KYC and technical documents are collected in order to start the BIS application without problems.
2. BIS Portal Registration : The license application is processed by the manufacturer being registered on the official portal of BIS.
3. Pre-Testing of Samples : Before submission, product samples are tested in a BIS authorized laboratory.
4. In-House Lab Requirement : Depending on the product, an internal laboratory facility might be necessary according to the BIS requirements.
5. BIS Review & Clarifications : BIS examines the submissions of documents and test reports and may request clarification.
6. BIS Audit at Factory : The audit of the product samples carried out by the BIS inspectors is done at the factory    . 
7. Timely Audit Completion : The audit, inspection and sample collection are conducted within 17 days of the application submission along with the EVTL India engineer.
8. EVTL India Engineer- Factory Inspection : The BIS auditor and an engineer at EVTL India undertake a proper inspection at the factory.
9. Independent Collection of Samples : The BIS auditor draws samples to be tested by the post-audit.
10. Sample Testing at BIS Lab : BIS sealed samples are sent to BIS laboratories, and the BIS department pays the price of testing.
11. Grant of BIS License : Upon satisfactory document inspection, testing and audit, ISI license is issued. 

Normal Procedure

The steps involved in the normal procedure are:

1. Submit Documents : Firstly, it is required to submit all the KYC and technical documentation to start the BIS application.
2.  Plan In-House Laboratory and Technical Proposal : Prepare an internal lab in case necessary and prepare all technical documentation.
3. Ready Factory Test Report (FTR) : Carry out in-house tests and document the FTR to demonstrate that the product is to the standards.
4. Submit Application & Fees : Includes your BIS application and the amount of fees necessary by the government.
5. BIS Audit : An audit of documents and processes at a BIS takes place within 3 weeks.
6. EVTL India Engineer Factory Inspection : BIS auditor inspects the factory with an EVTL India engineer to make sure that everything is in order. 
7. Sample Collection & Sealing : The BIS auditor picks samples randomly, puts them into a sealed sample and forward the sample to a BIS authorized lab to be tested.
8. License Approval : After the lab tests of the sample are passed-on, BIS issues the ISI license, and your product is certified and market-ready. 

BIS Certification Approval Timeline   

As per the Indian Standard IS 266, the expected time frame for receiving BIS License for Sulphuric Acid is as follows:

• For Indian Manufacturers : 40-45 days
• For International Manufacturers : Approximately 180 days  

Why EVTL India is the right choice for BIS support?

EVTL India is a reliable BIS Consultant for Sulphuric Acid under IS 266. Our professionals support manufacturers during the certification process, documentation, coordination with BIS approved laboratories, inspection of the factories and legal compliance.

EVTL India also offers Authorized Indian Representative (AIR) to foreign manufacturers and this guarantees them easy communication with BIS authorities and a hassle free entry to the Indian market. 

Conclusion

To guarantee the quality of the product, safety, and compliance with the regulations in the Indian market, it is necessary to obtain a BIS License for Sulphuric Acid according to IS 266. Sulphuric Acid that has been certified by BIS shows reliability, chemical purity, and that it meets the mandated Indian standards.

Working together with EVTL India as your BIS consultant, the manufacturers are not only able to acquire BIS certification in an efficient way, but they will also be able to increase their market credibility, as well as develop their confidence in expanding their business presence in India.

Frequently Asked Questions (FAQs)

1. Is Sulphuric Acid required to be BIS certified?

Yes, BIS certification is also compulsory in order to verify the Indian compliance with quality and safety standards. 

2. Who needs the Sulphuric Acid to be BIS Certified ?

Indian as well as foreign manufacturers to provide Sulphuric Acid to the Indian market need to acquire BIS certification.

3. How much time does it take to be BIS Certified?

The Indian manufacturers take an average of 40-45 days and the foreign manufacturers take approximately 180 days. 

4. What is BIS product testing?

BIS testing of products ensures that the Sulphuric Acid is in line with the requirements as laid out in IS 266. 

5. Can foreign manufacturers be certified by BIS ?

Yes, foreign manufacturers may get BIS certification with the help of an Authorized Indian Representative (AIR).