Stainless steel sliding door bolts (aldrops) are simple locking devices used to secure doors in homes, offices, and industrial buildings. They are made from stainless steel, which makes them strong, rust-resistant, and suitable for long-term use.
To ensure good quality and safe performance, the Bureau of Indian Standards provides BIS certification as per IS 15834:2022. This certification confirms that stainless steel sliding door bolts meet the required standards of strength, durability, and material quality.
What is IS 15834:2022
This is the Indian Standard for sliding door bolts used for locking doors in homes, offices, and industrial buildings. It is set by the Bureau of Indian Standards to ensure these door bolts are safe, durable, and of good quality for everyday use.
This standard ensures that the sliding door bolts are:
- Strong and reliable for proper door locking
- Made from quality stainless steel to prevent rust and corrosion
- Durable for long-term use without bending or breaking
- Easy to install and operate on different types of doors
- Safe to use in residential, commercial, and industrial applications
Testing and Inspection Requirements for Stainless Steel Aldrops
To ensure strong quality, proper locking performance, and long-lasting durability of these steel door bolts, the Bureau of Indian Standards has defined clear testing and inspection requirements under IS 15834:2022.
What are R and S?
- R (Required): Test must be done in the manufacturer’s in-house laboratory
-
S (Subcontracting Allowed): Test can be done in BIS-approved external or accredited laboratories
Physical and Dimensional Tests
- Dimensions and Size Check (R) – Ensures correct length, width, and bolt diameter as per standard
- Visual Inspection (R) – Checks surface finish, defects, and proper workmanship
- Finish Quality Test (R) – Ensures smooth surface and proper coating without rust or damage
Material Tests
- Material Composition Check (S) – Ensures stainless steel used meets IS quality requirements
- Raw Material Verification (R) – Confirms correct grade of steel is used for manufacturing
- Corrosion Resistance Test (S) – Ensures protection against rust in different environmental conditions
Mechanical Strength Tests
- Tensile Strength Test (S) – Checks strength and load-bearing capacity of bolts
- Manufacturing Strength Check (R) – Ensures proper forming, shaping, and assembly of bolts
- Locking Performance Test (R) – Confirms smooth operation and secure locking function
Finish and Surface Quality Checks
- Surface Finish Inspection (R) – Ensures smooth and defect-free surface
- Coating/Polishing Check (R) – Confirms proper finishing for durability and appearance
process for bis certification
The BIS certification process for Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks involves multiple steps, designed to thoroughly evaluate a product's compliance with the required standards. Here is a general overview of the certification process:
- Online Registration: Manufacturers register on the BIS Manak Online Portal by submitting company
details, factory information, and product specifications. Foreign manufacturers
must appoint an Authorized Indian Representative (AIR) in India.
- Testing at BIS-Approved Laboratory: Product samples are tested in BIS-approved laboratories to evaluate efficiency,
durability, and overall performance as per requirements.
- Application Submission: The application is submitted along with laboratory test reports, technical
documents, manufacturing process details, and factory information. Foreign
manufacturers must also provide AIR-related documents.
- Factory Inspection: BIS officials conduct an on-site inspection of the manufacturing unit to verify
production processes, quality control systems, safety measures, and compliance
with the standard.
- Grant of BIS License: If all requirements are successfully met, BIS issues the certification license under
Scheme-I, allowing the manufacturer to produce and sell certified products.
- Use of ISI Mark: After certification approval, the manufacturer is permitted to use the ISI mark
along with a CM/L number on the product, confirming compliance with the
standard.
document required for bis certification
| Basic Details | - GST Certificate
- Email ID & Contact Number
- Factory & Office Address
- Rent Agreement / Lease Deed (if applicable)
|
| Legal Documents | - Partnership Deed (if partnership firm)
|
| Manufacturing Details | - List of machinery
- Process flow chart
- Layout Plan of Factory
|
| Raw Material Details | - List of Raw Materials
- Supplier Details
- Raw Material Invoices
- Raw Material Test Certificates
|
| Testing & Quality Control | - List of Testing Equipment
- Calibration Certificates
- QC / Lab In-charge Appointment Letter & Qualification
|
| Production Details | - Annual Installed Capacity
- Last Year Production Value
|
| Product & Packaging Details | - Quantity per Package
- Nature of Packing
- Nature of Printing / Marking on Product
|
| Management Details | - Top Management Details
- Concerned Person for BIS Communication
|
| Brand & Certification Documents | - Trademark / Brand Certificate
- Consent Letter from BIS Recognized Laboratory
|
| Additional Documents | - Weekly Off Details
- Hygiene Document (if applicable)
- Relaxation Letter (if applicable)
- Any Other Relevant Document
|
Foreign manufacturers must additionally appoint an Authorized Indian Representative
(AIR) to coordinate with the Bureau of Indian Standards (BIS) and manage compliance
requirements in India.
Marking Requirements & License Validity
Marking Requirements
When a manufacturer obtains the BIS license, the ISI mark for sliding door bolts must be
applied clearly and permanently on the product or its packaging. In addition to the ISI
Mark, other important details must also be provided on the product or packaging, as
specified in the table below. This ensures the product meets all quality and safety
standards.
| Requirement | Details |
|---|
| ISI Mark | Indicates that the product is BIS certified and follows to the standard |
| Standard Number | IS 15834
|
| CML Number | Certification Marks Licence (CML) number issued by BIS |
| Manufacturer Details | Name of manufacturer or registered trademark |
| Batch / Date | Batch number, heat number, or manufacturing date for traceability |
Note: Marking is typically applied using durable stamping, tagging, or permanent printing to ensure clear identification during handling, storage, and transportation, as per BIS marking requirements.
Validity of BIS licenses for stainless steel aldrops
After obtaining BIS certification for the product, the license is valid for a fixed period and
must be maintained by following BIS rules and standards.
| articulars | Details |
|---|
| Initial Validity | Typically 1 to 2 years, depending on BIS approval conditions |
| Renewal | Must be renewed before expiry by submitting the application along with the prescribed fee and updated documents |
| Surveillance | Includes periodic factory inspections and market sample testing conducted by BIS |
| Compliance | Continuous following to standard and applicable Quality Control Orders (QCOs) is mandatory |
| Risk | Non-compliance or failed sample testing may lead to suspension or cancellation of the BIS license |
bis isi Mark Certification Costing and timeline
Cost of BIS certification for Sliding Door Bolts
The cost of BIS certification includes charges for application, inspection, license, testing,
and marking. These fees are paid to BIS as per Scheme I guidelines.
Cost Breakdown
Indian Manufacturers
| No. | Major Charges | Particulars | Amount | Remark |
| 1 | BIS Fees | Application Fee | INR 1,000 | — |
|
| Audit / Inspection Fee | INR 7,000 | — |
|
| License Fee | INR 1,000 | — |
|
| Marking Fee | Depends on product | Discount as per MSME |
| 2. | Testing Charges | Sample Testing Fee | As Applicable | Payable to a BIS-approved laboratory. |
| 3. | EVTL India Service Fee | Consultancy & Support | As per actual | Depends on product type and factory location. |
Foreign Manufacturers
| No. | Major Charges | Particulars | Amount | Remark |
| 1. | BIS Fees | Application Fee | USD 15 | Payable via SWIFT to BIS. SAARC countries can pay INR with 18% GST. |
|
| Audit Charges | USD 3,200 – 5,900 | Depend on Country |
|
| License Fee | USD 15 | — |
|
| Marking Fee | Depends on product | — |
| 2. | Testing Charges | Sample Testing Fee | As Applicable | Payable to a BIS-approved laboratory. |
| 3. | EVTL India Service Fee | Consultancy & Support | As per actual
| Based on product and manufacturing location. |
Conclusion
The BIS certification for stainless steel sliding door bolts (aldrops), as per IS
15834:2022, ensures that the product meets the required standards of quality and
strength for safe locking applications in homes, offices, and industrial buildings. It
confirms that the bolts are properly tested for corrosion resistance, smooth operation,
and long-lasting performance.
With the support and guidance of an experienced BIS consultant like EVTL India,
manufacturers can complete the BIS certification process smoothly, avoid errors, and
achieve faster approval for their products.
