BIS Certificate for Polyurethane Full Gloss Enamel (Two Pack) is a certificate issued by the Bureau of Indian Standards (BIS) to check the quality of the enamel. The BIS ISI Mark for Polyurethane Gloss Enamel ensures high performance, safety and gives a smooth shiny finish when the enamel is used on surfaces
The Polyurethane Full Gloss Enamel is used to preserve and enhance the appearance of objects made from materials such as metals and wood. The BIS for IS 13213 standard provides guidelines about the manufacturing process and control procedures. This includes testing the paint and ensuring its quality for every batch of goods manufactured. It is mandatory to obtain the BIS License for Gloss Enamel if covered under BIS QCO for Polyurethane Full Gloss Enamel (Two Pack). A manufacturer obtaining the BIS License for Polyurethane Full Gloss Enamel means that their product has been tested for important quality parameters and meets certain requirements. Further, it guarantees that the product is safe for use. The ISI mark of the Gloss Enamel provides assurance of its quality to the customers.
What is IS 13213:2018?
Indian Standard IS 13213:2018 defines the requirements, testing methods and marking of polyurethane full gloss enamel (two-pack). This is used as a protective and decorative coating on metals and other surfaces. BIS for Polyurethane Full Gloss Enamel covers the composition, properties, performance tests and packaging/markings required to ensure safe and consistent coating performance.
Key benefits of BIS certification for Two-Pack Polyurethane Full Gloss Enamel
Manufacturers can benefit after obtaining the BIS license for the Polyurethane Full Gloss Enamel. Benefits include -
- Helps in ensuring conformity with Indian safety standards and performance criteria, thereby enhancing market acceptability and government tender qualification.
- Ensures quality control on attributes such as gloss, film formation, adhesion, hardness, chemical resistance, and accelerated ageing
- Minimizes business risk arising out of product failure and provides traceability through CM/L number and ISI mark.
Who is eligible for BIS certification for Two-Pack Polyurethane Full Gloss Enamel?
The entities mentioned below are eligible for the BIS Certification for Polyurethane Full Gloss Enamel (Two Pack) -
- Indian manufacturers of two-component polyurethane full gloss enamel that are intended for use in India.
- Foreign producers/exporters wishing to export such paint into India will have to get BIS ISI Mark certification or designate their Authorised Indian Representative (AIR).
- Importers need to make sure that the Gloss Enamel is BIS certified when it falls under compulsory BIS QCOs for Polyurethane Full Gloss Enamel.
BIS Testing Requirements under IS 13213:2018
To ensure the quality of the Polyurethane Full Gloss Enamel, BIS has outlined several tests under BIS for IS 13213:2018. The BIS testing requirement for Polyurethane Full Gloss Enamel (Two Pack) include -
- Composition Test - Verifies the chemical composition of the polyurethane enamel.
- Consistency & Pot Life Tests - Check viscosity, consistency, and usable working time after mixing.
- Drying & Finish Tests - Evaluates drying time, finish quality, gloss, and colour.
- Film Performance Tests - Assesses dry film thickness, adhesion, flexibility, and scratch resistance.
- Physical Property Tests - Verifies flash point, fineness of grind, and material consistency.
- Lead Restriction Test - Checks lead content to ensure compliance with safety limits.
- Accelerated Resistance Tests - Test resistance to acid, alkali, oil, and solvents.
- Durability Tests - Evaluates weathering, colour retention, gloss retention, and corrosion resistance.
- Keeping Properties Test - Ensures paint remains stable and usable during storage.
Manufacturers can refer to the Product Manual for Polyurethane Full Gloss Enamel (Two Pack) for any information regarding product specification, testing, etc.
Process for Obtaining BIS Licence for Polyurethane Full Gloss Enamel (Two Pack)
For BIS certification as per IS 13213:2018, manufacturers have to go through a certain process which includes testing of the products, documentation, factory inspection and license approval. This process will ensure that the enamel meets the requirements of the Indian standard.
- Identification of product & scope: Ensure that the product is covered by IS 13213:2018 and requires approval from BIS as per the relevant QCO.
- Registration online: Registration of the manufacturer on the BIS Manak portal; foreign manufacturers must appoint an AIR.
- Sample testing: Submission of samples of the product to the laboratory recognized by BIS or accredited with NABL for conducting the mandatory tests as per IS 13213:2018.
- Filing of application: Uploading of test report, TDS, MSDS, manufacturing information, etc. at BIS.
- Factory inspection: BIS conducts factory inspection to ensure process control, traceability of raw material, Quality Control Laboratory and production uniformity.
- License issuance: License issued by BIS on successful evaluation and inspection under Scheme-I with CM/L number.
- ISI marking: ISI mark with standard number, CM/L number, Batch/date/heat number and other information printed on the package by the manufacturer.
Documents required under IS 13213:2018 Approval
Mandatory ISI Mark and CM/L Details for Two-Pack Polyurethane Full Gloss Enamel
BIS Certified Polyurethane Full Gloss Enamel (Two Pack) should have the prescribed markings on the pack/container of the product. Such markings include the ISI Mark and CM/L number. This helps identify certified products in accordance with the relevant BIS IS 13213:2018 standard.
BIS License Validity and Compliance Requirements as per IS 13213:201
BIS Certification Fee Structure for Polyurethane Full Gloss Enamel (Two Pack)
The cost of getting the BIS certification of Polyurethane Full Gloss Enamel (Two Pack) includes statutory BIS charges, lab testing costs, inspection charges and marking costs. Other details are mentioned below -
Note -
- Application fee for foreign manufacturers is payable via SWIFT (SAARC countries may pay in INR with applicable GST).
- Audit charges for foreign manufacturers vary based on country/location.
- The marking fee is determined based on the product category and production volume (MSME benefits may apply).
- Testing charges are paid directly to BIS-recognised laboratories.
- Consultancy fees vary depending on product type and factory location.
Common Challenges in BIS ISI Mark Certification for Polyurethane Full Gloss Enamel (Two Pack)
There could be several challenges faced by the manufacturer during the process of certification of Polyurethane Full Gloss Enamel as per the IS 13213:2018 standard. Below are some of the challenges and ways to avoid such issues -
Why Choose EVTL India as Your BIS Consultant for Polyurethane Full Gloss Enamel?
EVTL India, being one of the top BIS consultants in India, offers assistance to meet the standard compliance. A BIS ISI Mark consultant for Polyurethane Gloss Enamel (Two Pack) helps manufacturers through every stage of the BIS approval process. Having 12+ years of experience, our team ensures that all requirements of the IS 13213 are met.
- Documentation - Assists with preparing application documentation, TDS and labeling compliance.
- Laboratory coordination - Facilitates sample testing with BIS accredited/NABL laboratories and analysis of test reports.
- Factory readiness - Assists with the implementation of the quality control system, calibration and mock audit for passing the BIS inspection.
- Application submission & follow-up - Submits the application and interacts with BIS until obtaining the license.
Obtaining the BIS Licence becomes faster with the guidance of a BIS Agent for Polyurethane Gloss Enamel like EVTL India.
Conclusion
BIS Certification of Polyurethane Full Gloss Enamel (Two Pack) in accordance with the IS 13213:2018 standard guarantees the performance of the product. Manufacturers having the BIS License for Polyurethane Gloss Enamel help in gaining the customers' trust. With the support of a BIS Agent for Polyurethane Gloss Enamel, manufacturers will be able to receive the BIS license without any delay.
An experienced BIS consultant for Gloss Enamel, such as EVTL India, assists in product testing coordination, application filing, factory inspection support and follow-up with BIS authorities.
