BIS Certification for Mustard and Rape Seed Oilcake IS 1932

BIS Certification for Mustard and Rape Seed Oilcake ensures that the product is free of harmful substances and the quality is as per the Indian requirements. It guarantees the adherence to nutritional, purity and safety standards.

What is a BIS License for Manufacturers?

The Bureau of Indian Standards (BIS) is the national standards body of India that issues BIS License, commonly known as ISI Mark Certification. This certification assures that a product complies with the relevant Indian Standard for quality, safety, and performance.

In the case of Mustard and Rapeseed Oilcake under IS 1932, a BIS license guarantees adherence to the prescribed limits for moisture, oil, protein, and fiber content, and confirms that the product is free from toxic contaminants. Licensed manufacturers are authorized to use the ISI Mark, which enhances the product’s credibility and market value. 

Importance of the ISI Mark on Products

The significance of the ISI mark for Mustard and Rape Seed Oilcake consists of: 

1. Quality & Safety Assurance : Guarantees livestock and agriculture stability and safety of use.
2. Regulatory Compliance : Necessary in terms of legal sale and distribution of the products in the Indian market.
3. Market Acceptance : Establishes confidence between farmers, feed manufacturers and distributors.
4. Trade Benefits : Allows it to be involved in government tenders and institutional supply chains.
5. Consumer Confidence : Assures the company that the product is reliable and that it maintains the same standard quality 

Key details of IS 1932

IS 1932 defines the quality of Mustard and Rape Seed Oilcake given as follows: 

• Limits on moisture, protein, oil, fiber, and ash content
• Freedom from adulterants and harmful substances
• Uniformity in composition and appearance
• Sampling and testing methods
• Storage and labeling requirements

BIS certification according to IS 1932 ascertains that oilcake products are produced, tested and supplied to adhere to these standards. The ISI Mark is allowed on certified products, which means that it shows conformity and reliability.

List of documents required for BIS Registration?  

The following documents are necessary for Domestic Manufacturers:

1. List of raw material
2. Layout plan of the factory premises
3. List of testing equipment as per the Indian standard
4. Quality Control (QC) Personnel Details (Education degree and Aadhaar card)
5. GST
6. Authorized Person Aadhar & Pan Card
7. MSME
8. Electricity Bill
9. Email Address & Permanent Contact Number
10. Office Address
11. Factory Address
12. Copy of Partnership Deed / MOA (for Private Limited Co.)
13. Premises document / Rent Agreement
14. List of Manufacturing Machinery  

The following documents are necessary for Foreign Manufacturers:

1. Checklist for Application
2. Copy of Swift Remittance
3. Duly Filled Application Form
4. Copy of Business License
5. List of Machinery
6. List of Raw Material
7. Test certificate of Raw Material
8. List of Testing Equipment
9. Calibration certificate of Test Equipment
10. Process Flowchart
11. Layout Plan
12. Location Plan (Route Map)
13. Details of Technical Personnel
14. Qualification of QC
15. Copy of Certification of Product and/ System
16. Factory Test Report  
17. Agreement with AIR
18. Aadhar Card of AIR
19. AIR Nomination Form
20. Educational Degree of AIR
21. Undertakings
22. Scope of License

How manufacturers can apply for BIS Certification

There are two key procedures to get your BIS license: Simplified and Normal.

Simplified Procedure

The steps involved in the simplified procedure are:

1. Document Collection : All the necessary KYC and technical documents are collected in order to start the BIS application without problems.
2. BIS Portal Registration : The license application is processed by the manufacturer being registered on the official portal of BIS.
3. Pre-Testing of Samples : Before submission, product samples are tested in a BIS authorized laboratory.
4. In-House Lab Requirement : Depending on the product, an internal laboratory facility might be necessary according to the BIS requirements.
5. BIS Review & Clarifications : BIS examines the submissions of documents and test reports and may request clarification.
6. BIS Audit at Factory : The audit of the product samples carried out by the BIS inspectors is done at the factory    . 
7. Timely Audit Completion : The audit, inspection and sample collection are conducted within 17 days of the application submission along with the EVTL India engineer.
8. EVTL India Engineer- Factory Inspection : The BIS auditor and an engineer at EVTL India undertake a proper inspection at the factory.
9. Independent Collection of Samples : The BIS auditor draws samples to be tested by the post-audit.
10. Sample Testing at BIS Lab : BIS sealed samples are sent to BIS laboratories, and the BIS department pays the price of testing.
11. Grant of BIS License : Upon satisfactory document inspection, testing and audit, ISI license is issued. 

Normal Procedure

The steps involved in the normal procedure are:

1. Submit Documents : Firstly, it is required to submit all the KYC and technical documentation to start the BIS application.
2.  Plan In-House Laboratory and Technical Proposal : Prepare an internal lab in case necessary and prepare all technical documentation.
3. Ready Factory Test Report (FTR) : Carry out in-house tests and document the FTR to demonstrate that the product is to the standards.
4. Submit Application & Fees : Includes your BIS application and the amount of fees necessary by the government.
5. BIS Audit : An audit of documents and processes at a BIS takes place within 3 weeks.
6. EVTL India Engineer Factory Inspection : BIS auditor inspects the factory with an EVTL India engineer to make sure that everything is in order. 
7. Sample Collection & Sealing : The BIS auditor picks samples randomly, puts them into a sealed sample and forward the sample to a BIS authorized lab to be tested.
8. License Approval : After the lab tests of the sample are passed-on, BIS issues the ISI license, and your product is certified and market-ready. 

Estimated Timeline for ISI Mark Approval

As per the Indian Standard IS 1932, the expected time frame for receiving BIS License for Mustard & Rape Seed Oilcake is as follows:

• For Indian Manufacturers : 40-45 days
• For International Manufacturers : Approximately 180 days  

Why does EVTL India leads in BIS Certification Consulting?

EVTL India is a reliable BIS Consultant for Mustard & Rape Seed Oilcake by IS 1932. We have a highly qualified support team that offers full support, such as documentation, testing arrangements, factory verification, and communication with the BIS authorities.

In the case of foreign manufacturers, we also provide Authorized Indian Representative (AIR) services in order to have easy communication and a hassle-free BIS certification. 

Conclusion

ISI Certification for Mustard and Rape Seed Oilcake under IS 1932 is necessary to ensure the quality and safety of the product and its compliance with the regulations in India.

Under the conditions of cooperation with EVTL India, manufacturers will be able to get BIS licenses successfully, increase the credibility of the brands, and increase the coverage of the Indian agricultural market.

Frequently Asked Questions (FAQs)

1. Is BIS Certification needed for mustard and rapeseed oilcake?

Yes, BIS certification is needed to meet Indian quality and safety standards. 

2. Who is required to receive BIS Certification?

Both the Indian suppliers and manufacturers are required to be certified by BIS. 

3. What is the duration of BIS Certification ?

Indian manufacturers take about 40 - 45 days and foreign manufacturers take up to 180 days.

4. What is BIS testing?

Testing assures nutritional composition, purity and adherence to IS 1932.

5. Are foreign manufacturers eligible to be certified by BIS?

Yes, by means of an Authorized Indian Representative (AIR).