BIS Certification for Centrifugal Jet Pumps IS 12225

The BIS Certification for Centrifugal Jet Pumps under IS 12225 is a certification that is based on the performance, efficiency, safety, strength, and reliability guidelines. The certification will guarantee the user, regulators, and buyers that the pumps are produced under controlled conditions and meet the national standards of quality. 

An overview of BIS License

BIS License for Centrifugal Jet Pumps under IS 12225 enables manufacturers of centrifugal jet pumps to use the ISI Mark with regard to the meeting of the quality, safety and functioning requirements as developed by the Bureau of Indian Standards.

The certification process includes testing of the products at BIS-approved laboratories, factory checking, manufacturing process verification and continued monitoring. The BIS certification is obligatory and is necessary where the notification is given and is necessary to manufacture, import or sell Centrifugal Jet Pumps in India legally.

Reasons why ISI Certification matters to manufacturers

The reasons why ISI Certification on Centrifugal Jet Pumps matters is mentioned as follows:     

1. Quality Assurance : Assures adherence to standards of discharge, head, efficiency, materials and workmanship.
2. Performance Reliability : Mitigates regular performance of hydraulics and mechanical systems in the desired operating conditions.
3. Regulatory Compliance : Helps manufacturers to comply with the national rules and governmental acquisition needs.
4. Market Acceptance : Enhances acceptability of dealers, institutional purchasers, governmental agencies, and end users.
5. Brand  Trust & Credibility : Improves brand name through showing safety, durability and compliance with Indian standards.

Key requirements of IS 12225

The requirements of Centrifugal Jet Pumps in regard to their design, quality and testing are defined in IS 12225 which includes such parameters of discharge, head, efficiency and power consumption.

It also stipulates material quality, mechanical strength, electrical safety, workmanship and marking, labeling, packing and testing guidelines. Meeting of IS 12225 guarantees the Centrifugal Jet Pumps can be used safely, efficiently, and have a long life. 

Documents required for BIS registration

The following documents are necessary for Domestic Manufacturers:

1. List of raw material
2. Layout plan of the factory premises
3. List of testing equipment as per the Indian standard
4. Quality Control (QC) Personnel Details (Education degree and Aadhaar card)
5. GST
6. Authorized Person Aadhar & Pan Card
7. MSME
8. Electricity Bill
9. Email Address & Permanent Contact Number
10. Office Address
11. Factory Address
12. Copy of Partnership Deed / MOA (for Private Limited Co.)
13. Premises document / Rent Agreement
14. List of Manufacturing Machinery  

The following documents are necessary for Foreign Manufacturers:

1. Checklist for Application
2. Copy of Swift Remittance
3. Duly Filled Application Form
4. Copy of Business License
5. List of Machinery
6. List of Raw Material
7. Test certificate of Raw Material
8. List of Testing Equipment
9. Calibration certificate of Test Equipment
10. Process Flowchart
11. Layout Plan
12. Location Plan (Route Map)
13. Details of Technical Personnel
14. Qualification of QC
15. Copy of Certification of Product and/ System
16. Factory Test Report  
17. Agreement with AIR
18. Aadhar Card of AIR
19. AIR Nomination Form
20. Educational Degree of AIR
21. Undertakings
22. Scope of License

Mandatory steps to obtain a BIS License

There are two key procedures to get your BIS license: Simplified and Normal.

Simplified Procedure

The steps involved in the simplified procedure are:

1. Document Collection : All the necessary KYC and technical documents are collected in order to start the BIS application without problems.
2. BIS Portal Registration : The license application is processed by the manufacturer being registered on the official portal of BIS.
3. Pre-Testing of Samples : Before submission, product samples are tested in a BIS authorized laboratory.
4. In-House Lab Requirement : Depending on the product, an internal laboratory facility might be necessary according to the BIS requirements.
5. BIS Review & Clarifications : BIS examines the submissions of documents and test reports and may request clarification.
6. BIS Audit at Factory : The audit of the product samples carried out by the BIS inspectors is done at the factory. 
7. Timely Audit Completion : The audit, inspection and sample collection are conducted within 17 days of the application submission along with the EVTL India engineer.
8. EVTL India Engineer- Factory Inspection : The BIS auditor and an engineer at EVTL India undertake a proper inspection at the factory.
9. Independent Collection of Samples : The BIS auditor draws samples to be tested by the post-audit.
10. Sample Testing at BIS Lab : BIS sealed samples are sent to BIS laboratories, and the BIS department pays the price of testing.
11. Grant of BIS License : Upon satisfactory document inspection, testing and audit, ISI license is issued. 

Normal Procedure

The steps involved in the normal procedure are:

1. Submit Documents : Firstly, it is required to submit all the KYC and technical documentation to start the BIS application.
2.  Plan In-House Laboratory and Technical Proposal : Prepare an internal lab in case necessary and prepare all technical documentation.
3. Ready Factory Test Report (FTR) : Carry out in-house tests and document the FTR to demonstrate that the product is to the standards.
4. Submit Application & Fees : Includes your BIS application and the amount of fees necessary by the government.
5. BIS Audit : An audit of documents and processes at a BIS takes place within 3 weeks.
6. EVTL India Engineer Factory Inspection : BIS auditor inspects the factory with an EVTL India engineer to make sure that everything is in order. 
7. Sample Collection & Sealing : The BIS auditor picks samples randomly, puts them into a sealed sample and forward the sample to a BIS authorized lab to be tested.
8. License Approval : After the lab tests of the sample are passed-on, BIS issues the ISI license, and your product is certified and market-ready. 

What is the Approval Timeline for BIS Process

According to IS 12225, a BIS License for centrifugal jet pumps is expected to take:

For Simplified Procedure (Indian manufacturers)

Average 40-45 days

For Normal procedure  

• For Indian Manufacturers : 50-60 days
• For International Manufacturers : Approximately 180 days  

How EVTL India simplifies the BIS Licensing?

EVTL India has a good reputation of being a BIS consultant for centrifugal jet pump certification and provides end-to-end services. They provide complete service such as documentation, BIS portal, lab coordination, technical advice, and on-site inspection services.

EVTL India provides a cost-effective and compliance-oriented solution to assist both the Indian and foreign manufacturers to acquire BIS certification easily, correctly and under required stipulated time frames. 

Conclusion

BIS Certification for Centrifugal Jet Pumps under IS 12225 are vital to provide safety, efficiency, and consistency of performance in the context of pumping water. The certification secures the end users, helps in compliance of regulations and boosts credibility of the manufacturer in the competitive Indian market.

Under expert assistance of EVTL India, manufacturers will be able to streamline the process of BIS certification, prevent wastes of time and manage to introduce ISI-marked Centrifugal Jet Pumps in India. 

Frequently Asked Questions (FAQs)

1. Does India have a BIS Certification for Centrifugal Jet Pumps?

Yes, the BIS certification according to the IS 12225 is compulsory wherever informed in production and sale of Centrifugal Jet Pumps in India.

2. Who is eligible to have BIS Certification of centrifugal jet pumps?

There can be Indian manufacturers, and foreign manufacturers via an Authorized Indian Representative (AIR). 

3. What are the tests that are done according to IS 12225?

Other tests consisted of discharge and head performance tests, efficiency tests, power consumption tests, endurance tests, mechanical strength tests and electrical safety tests. 

4. Is it possible for foreign manufacturers to have the ISI Certification of Centrifugal Jet Pumps?

Yes, it is possible to apply by foreign manufacturers via a duly appointed AIR.

5. Is it compulsory to get an ISI mark following BIS Certification?

Yes, the ISI mark should be printed on every certified Centrifugal Jet Pumps and packaging.