BIS Certification for Blaine Air-Permeability Apparatus IS 5516

The apparatus should be able to meet IS 5516 which is the Indian Standard specifications to provide accurate and reproducible outcomes. This certification guarantees that the equipment is appropriate to be used in the cement plants, testing laboratories, and research facilities. 

An Introduction to BIS Certification?

The National Standards Body of India is the Bureau of Indian Standards (BIS) which creates and implements quality standards of products and systems. BIS certification makes sure that the products that are put in the Indian market meet the Indian Standards.

The manufacturers of Blaine Air-Permeability Apparatus that are licensed under a BIS License are allowed to use the ISI Mark on their product. This proves that the apparatus has been tested, inspected and found to meet the requirements of IS 5516 making it accurate and reliable in testing fineness of cement. 

Why is ISI Certification Needed for Products?

1. Testing Accuracy : Guarantees accurate determination of given surface area resulting in accurate assessment of cement quality.
2. Compliance with IS 5516 :  Ensures complete compliance to Indian Standard requirements of Blaine Air-Permeability Apparatus.
3. Quality and Consistency : Ensures consistency of performance and construction and adjustment between production batches.
4. Market Credibility : Increases the trust level of cement manufacturers, testing labs and regulatory agencies.
5. Legal and Business Advantage: Allows the sale and use of the equipment lawfully in India, especially by government and recognized labs. 

What is Indian Standard IS 5516 

IS 5516 outlines the specifications of the technical and quality of the Blaine Air-Permeability Apparatus applied in cement tests. The standard covers: 

• Structural and dimension requirements.
• Accuracy of measurement of permeability.
• Calibration and performance standards.
• Materials to be used in components.
• Marking, packaging and documentation. 

This is through compliance with IS 5516 so that the apparatus gives repeatable, reproducible and accurate results of fineness which helps to form quality control and standardization of cement in construction materials.

Necessary Documents for BIS Registration  

The following documents are necessary for Domestic Manufacturers:

1. List of raw material
2. Layout plan of the factory premises
3. List of testing equipment as per the Indian standard
4. Quality Control (QC) Personnel Details (Education degree and Aadhaar card)
5. GST
6. Authorized Person Aadhar & Pan Card
7. MSME
8. Electricity Bill
9. Email Address & Permanent Contact Number
10. Office Address
11. Factory Address
12. Copy of Partnership Deed / MOA (for Private Limited Co.)
13. Premises document / Rent Agreement
14. List of Manufacturing Machinery  

The following documents are necessary for Foreign Manufacturers:

1. Checklist for Application
2. Copy of Swift Remittance
3. Duly Filled Application Form
4. Copy of Business License
5. List of Machinery
6. List of Raw Material
7. Test certificate of Raw Material
8. List of Testing Equipment
9. Calibration certificate of Test Equipment
10. Process Flowchart
11. Layout Plan
12. Location Plan (Route Map)
13. Details of Technical Personnel
14. Qualification of QC
15. Copy of Certification of Product and/ System
16. Factory Test Report  
17. Agreement with AIR
18. Aadhar Card of AIR
19. AIR Nomination Form
20. Educational Degree of AIR
21. Undertakings
22. Scope of License

Stepwise process involved in BIS Approval

There are two key procedures to get your BIS license: Simplified and Normal.

Simplified Procedure

The steps involved in the simplified procedure are:

1. Document Collection : All the necessary KYC and technical documents are collected in order to start the BIS application without problems.
2. BIS Portal Registration : The license application is processed by the manufacturer being registered on the official portal of BIS.
3. Pre-Testing of Samples : Before submission, product samples are tested in a BIS authorized laboratory.
4. In-House Lab Requirement : Depending on the product, an internal laboratory facility might be necessary according to the BIS requirements.
5. BIS Review & Clarifications : BIS analyzes the documents and test reports provided and can seek clarifications.
6. BIS Audit at Factory : Audit of the product samples carried out by the BIS inspectors is done at the factory. 
7. Timely Audit Completion : The audit, inspection and sample collection are conducted within 17 days of the application submission along with the EVTL India engineer.
8. EVTL India Engineer- Factory Inspection : The BIS auditor and an engineer at EVTL India undertake a proper inspection at the factory.
9. Independent Collection of Samples : The BIS auditor draws samples to be tested by the post-audit.
10. Sample Testing at BIS Lab : BIS sealed samples are sent to BIS laboratories, and the BIS department pays the price of testing.
11. Grant of BIS License : Upon satisfactory document inspection, testing and audit, ISI license is issued. 

Normal Procedure

The steps involved in the normal procedure are:

1. Submit Documents : Firstly, it is required to submit all the KYC and technical documentation to start the BIS application.
2.  Plan In-House Laboratory and Technical Proposal : Prepare an internal lab in case necessary and prepare all technical documentation.
3. Ready Factory Test Report (FTR) : Carry out in-house tests and document the FTR to demonstrate that the product is to the standards.
4. Submit Application & Fees : Includes your BIS application and the amount of fees necessary by the government.
5. BIS Audit : An audit of documents and processes at a BIS takes place within 3 weeks.
6. EVTL India Engineer Factory Inspection : BIS auditor inspects the factory with an EVTL India engineer to make sure that everything is in order. 
7. Sample Collection & Sealing : The BIS auditor picks samples randomly, puts them into a sealed sample and forward the sample to a BIS authorized lab to be tested.
8. License Approval : After the lab tests of the sample are passed-on, BIS issues the ISI license, and your product is certified and market-ready. 

Time required to obtain BIS License 

The timeline of BIS Certification for Blaine Air-Permeability Apparatus under IS 5516 is estimated to be: 

• For Indian Manufacturers : 40-45 days
• For International Manufacturers : Approximately 180 days  

What choose EVTL India as your top BIS Consultant?

EVTL India is a reputed BIS certification consultant that would offer full guidance to Blaine Air-Permeability Apparatus under the IS 5516. They help in drafting documents, dealing with BIS authorized laboratories as well as efficiently managing factory audits.

Their technical specialists support manufacturers in all the steps they have to follow to comply with each one and minimize delays. EVTL India assists local and international manufacturers to get approvals and effortless certification on time. Partnering with EVTL India will ensure affordable, trusted and stress-free BIS certification. 

Conclusion

BIS License for Blaine Air-Permeability Apparatus under IS 5516 guarantees that the equipment provides accurate, consistent and standardized measurements. It assists the manufacturer in sustaining a stable quality, enhances the reliability of the test, and assists in a quality control in the laboratory and cement plant.

Certification assures that the standards are in conformity with Indian Standards and legal use and sale in India. It also boosts the product credibility to the customers and the regulators. In general, BIS certification enhances brand image and guarantees end-users of accurate and reliable test outcomes. 

Frequently Asked Questions (FAQs)

1. What is BIS Certification according to IS 5516?

It establishes that the equipment is within Indian specifications on cement fineness testing.

2. What is the reason why bis certification is necessary on standard sand?

Yes, to manufacture, sell or use the apparatus in India.

3. What does the ISI mark imply?

The equipment is verified and in accordance with the IS 5516.

4. What is its advantage to laboratories?

Provides fineness measurements that are accurate, repeatable and reliable. 

5. Are foreign manufacturers eligible?

No, through an Authorized Indian Representative (AIR).