High Density Polyethylene (HDPE) and Polypropylene (PP) woven sacks are extensively used for packaging of 50 kg cement bags for their high durability and strength. These sacks help in keeping the cement dry and safe from any type of pollution and leakage while in transit and also when stored at places like factories or warehouses. As cement plays an important role in construction, the quality of its packing is equally important and affects the safety, performance and even acceptability of the product. This makes it important for manufacturers to consider BIS QCO for cement packing materials.
In order to maintain uniformity and quality in these woven sacks, it is important to consider IS 11652:2017 for HDPE/PP woven sacks. The important qualities include strength of the fabric, seam performance, dimensional accuracy, load-carrying capacity, etc. Following the BIS Certification for Textiles HDPE/PP Woven Sacks for Packaging of 50 kg Cement ensures that all products comply with Indian regulations and can be certified. Also, the BIS ISI Mark for HDPE/PP woven sacks indicates good quality and better acceptance in the market.
IS 11652:2017 specifies the quality requirements for HDPE/PP woven sacks intended for packaging 50 kg of cement. The standard ensures that the sacks possess adequate mechanical strength, durability, dimensional accuracy and resistance to handling stresses encountered during filling, transportation, storage and distribution. Under this standard, woven sacks are:
The consequences related to bad packaging can include cement loss, contamination, and even transportation issues. Therefore, BIS Certification of HDPE/PP Woven Sacks according to the standard of IS 11652:2017 is necessary for ensuring quality and durability. This certificate will help the manufacturer meet the requirements of Indian standards as well as enhance the product acceptance in the cement packaging industry. Key Advantages of BIS Certification for HDPE/PP Woven Sacks under IS 11652:2017 are:
The standards describe the specifications for HDPE or PP woven bags used for packaging 50 kg of cement. This will ensure that all the critical requirements for the safety and proper packaging of the cement are met when the cement is packaged using these bags.
BIS Certification under IS 11652:2017 applies to manufacturers involved in the production of High Density Polyethylene (HDPE) and Polypropylene (PP) woven sacks used for packaging 50 kg cement. Compliance with BIS requirements helps ensure product quality, durability and suitability for cement packaging applications.
Applicable to:
In order to make sure that the performance of HDPE/PP Woven Sacks for the packaging of 50 kg Cement is safe and reliable, certain standards need to be met. In order to achieve this purpose, the Bureau of Indian Standards outlines certain testing criteria for these sacks according to IS 11652:2017. By following these criteria, manufacturers would be able to keep their standards at par when it comes to performance and other aspects of manufacturing. Below are the requirements according to IS 11652:2017:
The BIS Certification process ensures that High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement comply with the quality, strength, and performance requirements specified under IS 11652:2017. The certification process established by the Bureau of Indian Standards (BIS) includes the following steps:
The Foreign manufacturers must designate an Authorized Indian Representative (AIR) in India. The representative is the local point of contact for the Bureau of Indian Standards (BIS) and manages all compliance and regulatory requirements in India.
After issuance of the BIS License, the manufacturers are allowed to affix the ISI mark for HDPE/PP Woven Sacks for Packing of 50 kg of cement. The markings shall be clear and visible and shall be permanent on the sacks or on their packing. Along with ISI Mark, the manufacturer has to provide other information like License Number (CM/L), manufacturer's identity and other necessary details as mentioned in IS 11652:2017. Other necessary marking instructions are as follows:
Note: Marking is typically applied using durable stamping, tagging, or permanent printing to ensure clear identification during handling, storage, and transportation, as per BIS marking requirements.
The cost of BIS Certification for HDPE/PP Woven Sacks for Packaging of 50 kg Cement includes application fees, factory inspection charges, licence fees, product testing charges and marking fees. These charges are payable to the Bureau of Indian Standards (BIS) as per the provisions of Scheme-I under IS 11652:2017.
Note:
Use of HDPE/PP Woven Sacks that are in compliance with IS 11652:2017 for packing 50 kg cement bags is a common practice today because such products are extremely resistant to moisture and impact. In case of any manufacturer who wants to enter the regulated packaging sector, they must follow the production procedures and standards specified by BIS Certification for Textiles HDPE/PP Woven Sacks for cement packaging.
According to IS 11652:2017, the manufacturer should strictly control the characteristics like strength, weaving characteristics, dimensions, load resistance, etc. BIS ISI Mark for HDPE/PP Woven Sacks ensures conformity to national standards and BIS Quality Control Order requirements. Working with EVTL India professionals in terms of documentation, testing and obtaining the BIS certification approval will help you get through the process easily.