BIS Certification for Deltamethrin ULV IS 15227

BIS certifies Deltamethrin ULV as IS 15227 only when it is found to be in compliance with the ingredient content, formulation stability, impurity limits, and safety standards, allowing legal manufacture, sale, and distribution in India.

What does ISI Mark Certification mean?

The Bureau of Indian Standards (BIS) is the national standardization, product certification, and quality assurance agency in India. ISI certification is a confirmation that a product complies with the Indian standard and regulatory safety requirements.

Deltamethrin ULV certified by IS 15227 conforms to the quality standards of the formulation concerning stability and the level of impurities. Manufacturers that satisfy the quality requirements are awarded the ISI Mark, which shows that the pesticide is in accordance with Indian quality standards. 

Value addition of BIS Certification to products

BIS certification is important for adding value, as described below: 

1. Quality & Safety Assurance : BIS certification guarantees the production of a product that is both safe and consistent. It helps in averting unacceptable or inferior formulations.
2. Regulatory Compliance : It approves the legal production and sale of the product in India. Products can be penalized or restricted unless BIS certified.
3. Market Credibility : BIS-marked products demonstrate credibility among farmers, distributors, and the government.
4. Competitive Advantage : BIS-certified products are unique in the market and are usually preferred over non-certified products.
5. Safety of the Environment and the User : BIS standards minimize risks to humans, crops, soil, and water, ensuring minimal environmental impact. 

What does IS 15227 specify?

The Indian Standards (IS) are national standards that determine the product quality, safety, and performance standards. IS 15227 has these standards set with respect to Deltamethrin ULV. The following requirements are specified in IS 15227 for Deltamethrin ULV:

• Deltamethrin (active ingredient content)
• Stability of ULV formulation
• Acidity or alkalinity limits
• Maximum allowed toxic impurities
• Storage stability specifications
• Sampling, testing, marking, and packaging guidelines 

These parameters are verified at the time of BIS registration, after which the ISI Mark is granted. 

Requirement of documents for BIS Registration

The following documents are necessary for Domestic Manufacturers:

1. List of raw material
2. Layout plan of the factory premises
3. List of testing equipment as per the Indian standard
4. Quality Control (QC) Personnel Details (Education degree and Aadhaar card)
5. GST
6. Authorized Person Aadhar & Pan Card
7. MSME
8. Electricity Bill
9. Email Address & Permanent Contact Number
10. Office Address
11. Factory Address
12. Copy of Partnership Deed / MOA (for Private Limited Co.)
13. Premises document / Rent Agreement
14. List of Manufacturing Machinery  

The following documents are necessary for Foreign Manufacturers:

1. Checklist for Application
2. Copy of Swift Remittance
3. Duly Filled Application Form
4. Copy of Business License
5. List of Machinery
6. List of Raw Material
7. Test certificate of Raw Material
8. List of Testing Equipment
9. Calibration certificate of Test Equipment
10. Process Flowchart
11. Layout Plan
12. Location Plan (Route Map)
13. Details of Technical Personnel
14. Qualification of QC
15. Copy of Certification of Product and/ System
16. Factory Test Report  
17. Agreement with AIR
18. Aadhar Card of AIR
19. AIR Nomination Form
20. Educational Degree of AIR
21. Undertakings
22. Scope of License

Steps to obtain BIS License for manufacturers

There are two key procedures to get your BIS license: Simplified and Normal.

Simplified Procedure

The steps involved in the simplified procedure are:

1. Document Collection : All the necessary KYC and technical documents are collected in order to start the BIS application without problems.
2. BIS Portal Registration : The license application is processed by the manufacturer being registered on the official portal of BIS.
3. Pre-Testing of Samples : Before submission, product samples are tested in a BIS authorized laboratory.
4. In-House Lab Requirement : Depending on the product, an internal laboratory facility might be necessary according to the BIS requirements.
5. BIS Review & Clarifications : BIS examines the submissions of documents and test reports and may request clarification.
6. BIS Audit at Factory : The audit of the product samples carried out by the BIS inspectors is done at the factory    . 
7. Timely Audit Completion : The audit, inspection and sample collection are conducted within 17 days of the application submission along with the EVTL India engineer.
8. EVTL India Engineer- Factory Inspection : The BIS auditor and an engineer at EVTL India undertake a proper inspection at the factory.
9. Independent Collection of Samples : The BIS auditor draws samples to be tested by the post-audit.
10. Sample Testing at BIS Lab : BIS sealed samples are sent to BIS laboratories, and the BIS department pays the price of testing.
11. Grant of BIS License : Upon satisfactory document inspection, testing and audit, ISI license is issued. 

Normal Procedure

The steps involved in the normal procedure are:

1. Submit Documents : Firstly, it is required to submit all the KYC and technical documentation to start the BIS application.
2.  Plan In-House Laboratory and Technical Proposal : Prepare an internal lab in case necessary and prepare all technical documentation.
3. Ready Factory Test Report (FTR) : Carry out in-house tests and document the FTR to demonstrate that the product is to the standards.
4. Submit Application & Fees : Includes your BIS application and the amount of fees necessary by the government.
5. BIS Audit : An audit of documents and processes at a BIS takes place within 3 weeks.
6. EVTL India Engineer Factory Inspection : BIS auditor inspects the factory with an EVTL India engineer to make sure that everything is in order. 
7. Sample Collection & Sealing : The BIS auditor picks samples randomly, puts them into a sealed sample and forward the sample to a BIS authorized lab to be tested.
8. License Approval : After the lab tests of the sample are passed-on, BIS issues the ISI license, and your product is certified and market-ready. 

Time duration for BIS Certification process?

As per IS 15227, the expected timeline for BIS License for Deltamethrin ULV is:

For Simplified Procedure (Indian manufacturers)

Average 40-45 days

For Normal procedure  

• For Indian Manufacturers : 50-60 days
• For International Manufacturers : Approximately 180 days  

Make BIS Certification easy with EVTL India 

EVTL India is a reputable company to consult for BIS certification and to assist the manufacturers to direct them through the whole process of approval. It is also guaranteed to be compliant, quick in approvals, and hassle-free in certification with expert guidance.

• BIS Consultant for Deltamethrin ULV : Provides full guidance of documentation, testing, and compliance.
• ISI Consultant for Deltamethrin ULV : Makes sure that your product adheres to the IS 15227 requirement.
• BIS Agent for Deltamethrin ULV : Coordinates with BIS and license renewal.
• BIS QCO Support: Provides the adherence to the quality control orders and regulatory standards. 

The BIS certification process is made hassle-free, reliable, and efficient through the partnership with EVTL India, where one can have the application submitted and then the license issued easily. 

Conclusion

In India, BIS certification for Deltamethrin ULV under IS 15227 is necessary to ensure quality, safety, and regulatory compliance. With professional guidance from EVTL India, manufacturers can enjoy quicker approvals, a better market reputation, and easy access to controlled agriculture and public health markets. 

Frequently Asked Questions (FAQs)

1. Does Deltamethrin ULV have to be BIS certified?

Yes, in India, Deltamethrin ULV is required to be certified by BIS.

2. Who is eligible to be registered by BIS?

Both foreign and Indian manufacturers can apply. Foreign manufacturers must appoint an Authorized Indian Representative (AIR). 

3. What tests are conducted under IS 15227?

Active ingredient content, formulation stability, acidity/alkalinity, impurity limits, and storage stability tests.

4. Is it possible for a foreign manufacturer to get BIS Certification?

Yes, with the help of an Authorized Indian Representative (AIR).