BIS Certification for Combination Side Cutting Pliers is a certification awarded by the Bureau of Indian Standards. It means that the pliers meet the specifications of IS 3650. This certification is very important for the manufacturer as it increases their chances of selling their approved product in India.
Combination side cutting pliers are manual tools used for cutting, holding and twisting wires. The BIS Registration for Combination Side Cutting Pliers includes several steps. Manufacturers must complete each step to get the BIS License for Combination Side Cutting Pliers The BIS ISI Mark for Combination Side Cutting Pliers assures the buyer that the tool has undergone proper testing. For the BIS certification of these tools, there are certain standards which need to be met. In simple words, BIS ISI Mark Certification for Combination Side Cutting Pliers is very helpful in ensuring the quality of the pliers. Manufacturers can take help from a BIS Agent for Combination Side Cutting Pliers to obtain the BIS license in an easy manner.
What is IS 3650:2026 Standard?
IS 3650:2026 is the Indian Standard which provides the criteria for combination side cutting pliers. The standard includes specifications such as material, design, dimensions, hardness, cutting action and general construction. The standard makes sure that these tools have the strength to handle daily use without breaking, warping or blunting. As per BIS, the combination side cutting pliers are tested for the following key parameters -
- Material quality
- Dimensions and design
- Hardness of jaws
- Cutting performance
- Grip and handle strength
- Load resistance
- Corrosion resistance
- Overall build quality
Eligibility for BIS Certification under IS 3650:2026
BIS ISI mark Certification for Combination Side Cutting Pliers under IS 3650:2026 is necessary product is covered under the applicable BIS QCO. The BIS License for Combination Side Cutting Pliers must be obtained by -
- Manufacturers (India): Must obtain the BIS ISI Mark for Combination Side Cutting Pliers if the product falls under the applicable Quality Control Order (QCO).
- Foreign Manufacturers: Must obtain BIS Certification for Combination Side Cutting Pliers before exporting or selling the product in the Indian market.
- Importers: Must ensure that only BIS-certified Combination Side Cutting Pliers are imported and sold in India.
BIS Inspection & Testing for Combination Side Cutting Pliers (IS 3650:2026)
BIS testing for Combination Side Cutting Pliers (IS 3650:2026) makes sure that the pliers pass all the quality and safety tests. The tests performed include material strength, hardness, cutting capacity, mechanical strength, insulation properties (if any), and the grip test. The BIS testing requirement as per IS 3650:2026 are listed below -
| Test Group | What is Tested | Purpose |
| Dimensional Tests | Length, jaw size, and overall dimensions of pliers | Ensures correct size, design accuracy, and standard compliance |
| Hardness Tests | Hardness of cutting edges and jaws | Ensures cutting efficiency and long-lasting sharpness |
| Cutting Performance Tests | Cutting of hard wire and soft wire | Ensures effective and smooth wire cutting ability |
| Mechanical Strength Tests | Shock test, torsion test, bend test, and handle load test | Ensures pliers can withstand physical stress without breaking |
| Grip & Function Tests | Tube gripping test and operational checks | Ensures proper gripping performance and usability |
| Insulation Tests (if applicable) | Electrical insulation of handles (for insulated type) | Ensures user safety from electrical hazards |
| Finish & Workmanship Tests | Surface finish, coating, and overall workmanship | Ensures good manufacturing quality and corrosion resistance |
BIS Registration for Combination Side Cutting Pliers Process
BIS for IS 3650:2026 specifies the guidelines for the Combination Side Cutting Pliers certification process under the Bureau of Indian Standards. This is to ensure that the item fulfills all necessary criteria of safety and performance before entering the Indian market. The steps for BIS Approval for Combination Side Cutting Pliers include -
- Online Registration: Register through the BIS website providing information about the organization and the products. Foreign manufacturers must appoint an Authorized Indian Representative (AIR).
- Product Testing: Pliers are tested by BIS laboratories as per IS 3650:2026 standards.
- Filing Application: Submit the results of tests, technical, and factory data.
- Factory Inspection: Conducted by BIS for verification of manufacturing facilities and quality system.
- Issue of License: BIS grants approval under Scheme-I if all requirements fulfilled.
- Use of ISI Mark: Authorized products to have the ISI mark along with CM/L number.
Documents Required for BIS IS 3650:2026 Approval
If the product falls under BIS QCO for Combination Side Cutting Pliers, manufacturers need to obtain the BIS license for Combination Side Cutting Pliers. The list of important documents for BIS Registration includes -
- BIS application form
- GST Certificate and Company PAN
- Factory address proof and office address proof
- Manufacturing process flow chart
- Factory layout plan
- List of manufacturing machinery
- List of raw materials with supplier details
- Product test report from a BIS-recognized laboratory
- List of testing equipment with calibration certificates
- Quality control (QC) documents
- Product specifications and product marking details
- Trademark registration certificate or brand authorization letter (if applicable)
- Authorized signatory details
- Production capacity details
BIS ISI Marking Requirements under IS 3650:2026
The BIS ISI Mark for Combination Side Cutting Pliers according to IS 3650:2026 shall be displayed clearly on the product or its packing after approval from the BIS. Further information is given below -
| Requirement | Details |
| ISI Mark | Indicates BIS certification compliance |
| Standard Number | IS 3650:2026 |
| CM/L Number | BIS license identification number |
| Manufacturer Details | Brand name or company name |
| Traceability Marking | Batch or manufacturing details |
BIS Certification Validity for Combination Side Cutting Pliers
| Particulars | Details |
| Validity | Typically 1 to 5 years, depending on BIS approval conditions |
| Renewal | Must be renewed before expiry by submitting the application along with the prescribed fee and updated documents |
| Surveillance | Includes periodic factory inspections and market sample testing conducted by BIS |
| Compliance | Continuous following to standard and applicable Quality Control Orders (QCOs) is mandatory |
| Risk | Non-compliance or failed sample testing may lead to suspension or cancellation of the BIS license |
BIS Approval Fees for Combination Side Cutting Pliers
The charges for a BIS licence for Combination Side Cutting Pliers include application, audit, testing, licensing and marking fees. Additional details are mentioned below -
| Charge Type | Indian Manufacturers | Foreign Manufacturers |
| Application Fee | INR 1,000 | USD 15 |
| Audit Charges | INR 7,000 | USD 3,200 - 5,900 |
| License Fee | INR 1,000 | USD 15 |
| Marking Fee | As applicable | As applicable |
| Testing Charges | As applicable | As applicable |
| EVTL India Consultancy Fee | As per actual | As per actual |
Note -
- Application fee for foreign manufacturers is payable via SWIFT (SAARC countries may pay in INR with applicable GST).
- Audit charges for foreign manufacturers vary based on country/location.
- The marking fee is determined based on the product category and production volume (MSME benefits may apply).
- Testing charges are paid directly to BIS-recognised laboratories.
- Consultancy fees vary depending on product type and factory location.
Advantages of ISI Mark for Side Cutting Pliers
The BIS ISI Mark Certificate ensures that the combined side-cutting pliers meet the Indian safety standards as mentioned in IS 3650:2026. The tools undergo tests related to their resistance, cutting ability, durability, etc. Some of the benefits of getting the BIS ISI Mark for Combination Side Cutting Pliers are -
- Improves safety for users, especially electricians and technicians handling live environments
- Builds customer trust and brand credibility in domestic and export markets
- Allows legal sale in India
- Reduces risk of product failure
- Ensures consistent product quality
Why choose EVTL India as a BIS Consultant for Combination Side Cutting Pliers?
The BIS ISI Mark consultant for Combination Side Cutting Pliers helps manufacturers to get the BIS approval without any unnecessary delay. The BIS agents for Combination Side Cutting Pliers ensure that the manufacturers are guided through each step to get IS 3650:2026 compliance. EVTL India, one of the top BIS consultants in India, provides support in -
- Understanding BIS for IS 3650:2026 requirements
- Preparing documentation and application
- Coordinating product testing in BIS labs
- Supporting the factory inspection process
- Reducing delays and rejection risks
Conclusion
The BIS Certification for Combination Side Cutting Pliers (IS 3650:2026) is mandatory to ensure the safety and durability of these products. By obtaining the BIS ISI Mark certificate for Combination Side Cutting Pliers, companies guarantee that the products are manufactured to meet the Indian standard requirements. Having the BIS ISI mark for Combination Side Cutting Pliers improves the market acceptance of the products.
Products that do not have BIS Approval can face restrictions on manufacturing and selling the product in India. Hence, all manufacturers and importers must follow the right process to obtain the BIS Approval for Side Cutting Pliers.
EVTL India provides complete assistance to manufacturers in getting BIS certification for their products. The professional help provided by the Best BIS ISI Mark Consultant for Combination Side Cutting Pliers will help manufacturers obtain the product license under IS 3650:2026.
