Ferromolybdenum is commonly used in the steel and alloy manufacturing industry. It is used to
enhance the strength and durability of the metal products. This is an alloy produced by adding
iron to molybdenum. FeMo alloy is used in steel manufacturing to make the metal harder and
more heat-resistant. They are widely used in industries like construction, automobile,
aerospace, etc.
The manufacturer must get the BIS certification to ensure that the product is up to the mark. The
compliance with the standard IS 1469: 1993 includes a detailed examination of the chemical
composition, consistency of the product, and other parameters. After getting approval from BIS,
the manufacturer is allowed to stamp the ISI logo on the product. The approval mark on the
product helps buyers identify products that meet recognized performance and safety standards.
What is IS 1469: 1993?
This is the Indian Standard for Ferromolybdenum. It mentions a few criteria, such as particle
size and quality, to ensure the alloy is reliable for metallurgical use. As per the BIS (Bureau of
Indian Standards),
Ferroalloy Molybdenum are:
- Evaluated for chemical composition
- Checked for particle size
- Inspected for contamination
- Monitored under quality assurance
Eligibility Criteria for Molybdenum Ferro Alloy BIS License
BIS authorisation under IS 1469: 1993 is required for businesses involved in manufacturing,
importing, or supplying ferro alloys in India.
Applicable to:
- Manufacturers (India) - Must get BIS approval if the products are covered under QCO.
- Foreign Manufacturers - Need certification to export FeMo alloy to India.
- Importers/Brand Owners - Must ensure that the products are BIS-certified before sale.
- Sellers/Distributors - Should only sell certified Industrial alloy.
Testing and Inspection Requirements
To ensure the consistency of ferromolybdenum used in metallurgical and alloy manufacturing,
the Bureau of Indian Standards outlines the minimum requirements under IS 1469: 1993. This
certification ensures that manufacturers meet the quality assurance standards for
ferromolybdenum products.
The BIS testing parameters and quality checks for the Molybdenum Alloy are listed below:
How to Get BIS License for Ferro Alloys?
The BIS Authorisation process ensures that the FeMo alloy meets the required standards for
proper and efficient operation. This process is set by the Bureau of Indian Standards (BIS) and
includes the following steps:
- Online Registration: Manufacturers register on the BIS Manak portal by submitting company, factory, and product details. Foreign manufacturers must appoint an Authorized Indian Representative (AIR).
- Testing at BIS-Approved Laboratory: Product samples are tested in BIS-approved laboratories for dimensional accuracy, mechanical strength, and overall material performance.
- Application Submission: The application is submitted along with test reports, technical documents, and factory details. Foreign manufacturers must also submit AIR-related documents.
- Factory Inspection: BIS officials inspect the manufacturing units to verify the production process, safety measures, and quality control system.
- Grant of BIS License: If all the above requirements are satisfactorily met, BIS grants the certification license under Scheme-I.
- Use of ISI Mark: Once approved, the manufacturer can affix the ISI mark on the product with a CM/L number, confirming that the product meets BIS standards.
Documents checklist for IS 1469 : 1993 approval
| Document Category | Documents Required |
|---|
| Basic Details | GST Certificate, Email ID & Contact Number, Factory & Office Address, Rent Agreement / Lease Deed (if applicable),Partnership Deed (if applicable for partnership firms) |
| Manufacturing Details | List of Machinery, Process Flow Chart, Factory Layout Plan |
| Raw Material Details | List of Raw Materials, Supplier Details, Raw Material Invoices, Raw Material Test Certificates |
| Testing & Quality Control | List of Testing Equipment, Calibration Certificates, QC/Lab In-charge Appointment Letter & Qualification |
| Production Details | Annual Installed Capacity, Last Year Production Value |
| Product & Packaging Details | Quantity per Package, Nature of Packing, Product Printing / Marking Details |
| Management Details | Top Management Details, BIS Communication Contact Person |
| Brand & Certification Documents | Trademark / Brand Certificate, Consent Letter from BIS Recognized Laboratory |
| Additional Documents | Weekly Off Details, Hygiene Document (if applicable), Relaxation Letter (if applicable), Any Other Relevant Document |
| Foreign Manufacturer Requirement | Appointment of Authorized Indian Representative (AIR) for BIS coordination and compliance in India |
Foreign manufacturers are required to appoint an Authorized Indian Representative (AIR) in India. This person is the local point of contact for the Bureau of Indian Standards (BIS) and takes care of all rules and compliance work in India.
Marking Requirements & License Validity
Marking Requirements
After the BIS approval, the ISI Mark for Molybdenum Ferro Alloy must be clearly and
permanently marked on its packaging or on the product. Along with the ISI Mark, important
details such as the manufacturer’s identification and licence number (CM/L) are required. This
ensures the product complies with all safety and performance standards. More details are
mentioned below:
| Requirement | Details |
|---|
| ISI Mark | Indicates that the product is BIS certified and conforms to standards |
| Standard Number | IS 1469 : 1993 |
| CML Number | Certification Marks License (CML) number issued by BIS |
| Manufacturer Details | Name of manufacturer or registered trademark |
| Batch / Date | Batch number, heat number, or manufacturing date for traceability |
Note: Marking is typically applied using durable stamping, tagging, or permanent printing to ensure clear identification during handling, storage, and transportation, as per BIS marking requirements.
Validity for mo ferro alloy BIS License
| particulars | Details |
|---|
| Initial Validity | Typically 1 to 2 years, depending on BIS approval conditions |
| Renewal | Must be renewed before expiry by submitting the application along with the prescribed fee and updated documents |
| Surveillane | Includes periodic factory inspections and market sample testing conducted by BIS |
| Compliance | Continuous following to standard and applicable Quality Control Orders (QCOs) is mandatory |
| Risk | Non-compliance or failed sample testing may lead to suspension or cancellation of the BIS license |
fee structure for ferro molybdenum alloy BIS License
The cost of BIS Approval for Non-Pressure Sewerage Pipes includes charges for application, inspection, license, testing, and marking. These fees are paid to BIS as per Scheme I guidelines.
| Charge Type | Indian Manufacturers | Foreign Manufacturers |
|---|
| Application Fee | INR 1,000 | USD 15 |
| Audit Charges | INR 7,000 | USD 3,200 – 5,900 |
| License Fee | INR 1,000 | USD 15 |
| Marking Fee | As applicable | As applicable |
| Testing Charges | As applicable | As applicable |
| EVTL India Consultancy Fee | As per actual | As per actual |
Note:
- Application fee for foreign manufacturers is payable via SWIFT (SAARC countries may pay in INR with applicable GST).
- Audit charges for foreign manufacturers vary based on country/location.
- The marking fee is determined based on the product category and production volume (MSME benefits may apply).
- Testing charges are paid directly to BIS-recognised laboratories.
- Consultancy fees vary depending on product type and factory location.
Conclusion
Ferromolybdenum remains an important alloying material for industries that require strong steel
products. The quality of this alloy is assured after it is tested using the IS 1469: 1993 standards.
Testing this alloy will help in reducing cases of alloy failures. It also improves production
efficiency and supports long-term structural stability.
Businesses seeking BIS certification for ferromolybdenum often take guidance from
professionals to manage the process. EVTL India provides assistance to the manufacturers with
documentation, coordination of testing requirements and much more. It also helps applicants to
meet the technical requirements more efficiently and reduce unnecessary delays during the
certification process.
